Air-to-air heat pumps in Barking
Cooling and heating for offices, shops and hospitality venues in Barking, with a free site survey and a fixed written quote.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does an air-to-air heat pump cost in Barking?
Our guide range in Barking is £2,095–£5,050 per zone before VAT; a typical job (shop or office heated and cooled by 2–4 units) is £5,695–£17,295 plus VAT. You get a fixed written quote after the free survey.
An air-to-air heat pump takes heat from the outside air and releases it indoors as warm air — the same equipment as reverse-cycle air conditioning, sized and set up for heating.
Covering Barking and nearby
Barking sits within London's dense commercial fabric: shopfronts, offices above, studios and venues, where outdoor unit positions and access need careful planning.
We cover every Barking postcode, including IG11 and IP6. We also cover Ilford, Thamesmead and Canning Town, all within easy reach of Barking. We plan installations in Barking so the noisy work — core drilling, ceiling access, lifting plant — happens when it disturbs your business least.
What is included
- Heat loss and heat gain assessment
- Outdoor units positioned for air flow and defrost drainage
- Controls with schedules and set-back temperatures
- Commissioning and handover
- Running-cost guidance against your current heating
Prices in Barking
These guide prices are adjusted for London, where labour and access costs run about 28% above the UK guide.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Wall-mounted heat pump unit | £2,095–£3,795 | £2,514–£4,554 | per zone |
| Cassette heat pump unit | £3,150–£5,050 | £3,780–£6,060 | per zone |
| Floor-standing console unit | £2,500–£4,395 | £3,000–£5,274 | per zone |
| Removal of old electric heaters | £60–£160 | £72–£192 | per heater |
Ex VAT, supply and install.
How it works in Barking
Heat loss survey
We assess fabric, glazing and ventilation to size for winter as well as summer. For sites in Barking we confirm access and parking beforehand.
Design
Units are chosen for their heating output at low outdoor temperatures, not just their cooling rating.
Install
Outdoor units go where defrost water can drain safely and air flow is not restricted.
Set controls
Schedules and set-backs are configured so the system heats efficiently.
Points to plan for in Barking
Defrost water
Outdoor units shed water and ice when they defrost. They need a drained position away from walkways.
Conservation areas
Historic streets and listed buildings in and around Barking are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.
Winter output
Heating output falls as it gets colder outside, so we size against winter design temperatures.
Roof and height work
Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.
Who we work with in Barking
- Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
- Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.
FAQs for Barking
How much does an air-to-air heat pump cost in Barking?
Guide prices in Barking run from about £2,095 to £5,050 per zone, plus VAT. A typical job (shop or office heated and cooled by 2–4 units) costs £5,695–£17,295 plus VAT. We fix the price in writing after a free survey.
Do you also cover Ilford, Thamesmead and Canning Town?
Yes. Alongside Barking, we also cover Ilford, Thamesmead and Canning Town. Each has its own page with local guide prices.
Which postcodes do you cover in Barking?
All of them, including IG11 and IP6. Give us your postcode when you enquire and we will confirm the visit details.
Is it cheaper than electric heaters?
In most cases, yes. A heat pump delivers several kWh of heat per kWh of electricity, while panel heaters deliver one. Actual savings depend on the system, building and tariff.
Will we still need other heating?
Often not, but in some buildings a small back-up for the coldest days is sensible. We advise at survey.
Need air-to-air heat pumps in Barking?
Free survey and fixed written quote. We reply with a guide price or to book the survey.