0800 088 6248
Two engineers lifting a ceiling cassette air conditioning unit into a suspended ceiling grid

Commercial air conditioning installation in Burgess Hill

A free survey, a clear specification and a fixed price for commercial air conditioning installation in Burgess Hill.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does commercial air conditioning installation cost in Burgess Hill?

Budget roughly £2,250–£5,450 per indoor unit (zone) ex VAT in Burgess Hill. For a typical job — small shop or office, 2–4 indoor units — expect £5,695–£18,995 plus VAT. You get a fixed written quote after the free survey.

Commercial air conditioning installation is the design, supply, fitting and commissioning of a cooling (and usually heating) system for a business premises.

Working in Burgess Hill

Businesses in Burgess Hill range from independent shops and restaurants to offices, clinics and warehouses. Brighton is about 14 km away.

That includes premises in RH15 and the surrounding districts. Neighbouring towns we cover include Haywards Heath, Portslade and Hove. For commercial air conditioning installation in Burgess Hill, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.

What you get

  • System and unit selection with a clear written specification
  • Refrigerant pipework, insulation and condensate drainage (with pumps where needed)
  • Pressure testing, evacuation and charging
  • Commissioning, controls set-up and a handover walk-through
  • F-gas records, labelling and commissioning certificates

Prices in Burgess Hill

Prices below include our regional adjustment for the South East (15% above the UK guide).

AC installation guide prices, Burgess Hill
ItemGuide price (ex VAT)Inc VATBasis
Single wall-mounted split (2.5–7 kW)£1,650–£3,395£1,980–£4,074per system
Ceiling cassette£2,450–£5,695£2,940–£6,834per unit
Multi-split, 2–4 indoor units£3,950–£11,450£4,740–£13,740per system
Ducted indoor unit with grilles£3,950–£9,150£4,740–£10,980per unit
Electrical supply and isolator£280–£915£336–£1,098per system

Ex VAT, supply and install, standard access and up to about 5 m of pipework per unit.

How it works in Burgess Hill

  1. Survey

    We measure the space, check the ceiling void, wall construction, glazing and occupancy, and agree where indoor and outdoor units can go. For sites in Burgess Hill we confirm access and parking beforehand.

  2. Design and quote

    You get a written specification with unit sizes, positions, pipe routes and a fixed price — plus any planning, landlord or noise points to resolve first.

  3. First fix

    Pipework, cabling and condensate runs go in, usually above ceilings or in neat trunking, before the units are hung.

  4. Install and test

    Indoor and outdoor units are fitted, the system is pressure tested with nitrogen, evacuated and charged with refrigerant.

  5. Commission and hand over

    We set up controls, check air flows and temperatures, show your team how to use it and hand over the F-gas and commissioning paperwork.

Local points to consider

Planning and noise

Outdoor units on commercial buildings often need planning permission — particularly on a front elevation, in a conservation area or on a listed building — and councils may ask for a noise assessment.

Conservation areas

Historic streets and listed buildings in and around Burgess Hill are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Condensate

Every cooling unit produces water. We route it to a drain by gravity where possible and fit a quiet condensate pump where not.

Shared buildings

In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.

Premises we work in around Burgess Hill

  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

Questions about AC installation in Burgess Hill

How much does commercial air conditioning installation cost in Burgess Hill?

Guide prices in Burgess Hill run from about £2,250 to £5,450 per indoor unit (zone), plus VAT. A typical job (small shop or office, 2–4 indoor units) costs £5,695–£18,995 plus VAT. We fix the price in writing after a free survey.

Do you also cover Haywards Heath, Portslade and Hove?

Yes. Alongside Burgess Hill, we also cover Haywards Heath, Portslade and Hove. Each has its own page with local guide prices.

Which postcodes do you cover in Burgess Hill?

All of them, including RH15. Give us your postcode when you enquire and we will confirm the visit details.

Will the system heat as well as cool?

Almost all modern commercial air conditioning is a heat pump that can heat as well as cool. Many businesses use it as their main heating in spring and autumn.

How long does a commercial air conditioning installation take?

A single split system is usually fitted in a day. A small office or shop with three or four units typically takes two to four days, and a VRF system for a whole floor can take several weeks. We confirm the programme in the quote.

Need commercial air conditioning installation in Burgess Hill?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote