0800 088 6248
Heat recovery ventilation unit mounted at high level with four insulated ducts

Heat recovery ventilation (MVHR) in Stanford-le-Hope

A free survey, a clear specification and a fixed price for heat recovery ventilation in Stanford-le-Hope.

  • Free site survey and fixed written quote
  • Equipment, positions and price set out in writing
  • Work planned around your opening hours

How much does heat recovery ventilation cost in Stanford-le-Hope?

Our guide range in Stanford-le-Hope is £5,350–£20,995 per unit installed before VAT; a typical job (heat recovery for a 100–200 m² office) is £7,500–£15,650 plus VAT. The fixed price follows a free survey.

Heat recovery ventilation (MVHR) supplies fresh air and extracts stale air through a unit with a heat exchanger, which transfers much of the heat from the outgoing air to the incoming air.

Working in Stanford-le-Hope

Businesses in Stanford-le-Hope range from independent shops and restaurants to offices, clinics and warehouses. Basildon is about 5 km away.

Postcode districts we cover in Stanford-le-Hope include SS17. Nearby, we also cover Basildon (about 5 km), Pitsea (about 7 km) and Grays (about 9 km). For heat recovery ventilation in Stanford-le-Hope, the survey looks at how the space is used, where equipment and ductwork can go and what the electrical supply can take.

Included as standard

  • Fresh-air rate and unit sizing
  • Heat recovery unit with filters and summer bypass
  • Intake and exhaust terminals
  • Controls with CO2 or time control
  • Balancing and commissioning

Local guide prices for Stanford-le-Hope

Guide prices for Stanford-le-Hope, set for the East of England. Your fixed price comes in writing.

Heat recovery ventilation guide prices, Stanford-le-Hope
ItemGuide price (ex VAT)Inc VATBasis
Ceiling-void heat recovery unit (small)£5,350–£9,650£6,420–£11,580per unit
Floor-standing or roof unit (medium)£9,650–£20,995£11,580–£25,194per unit
Filter change£105–£265£126–£318per unit
Annual service£210–£425£252–£510per unit

Ex VAT, supply and install including standard ductwork.

How a job in Stanford-le-Hope works

  1. Calculate

    Fresh-air needs are calculated per room. For sites in Stanford-le-Hope we confirm access and parking beforehand.

  2. Select

    A unit is chosen for air flow, efficiency and space.

  3. Install

    Unit, ductwork, terminals and controls are fitted.

  4. Balance

    Supply and extract air flows are balanced and commissioned.

Local points to consider

Summer bypass

A bypass avoids warming incoming air in summer.

Conservation areas

Historic streets and listed buildings in and around Stanford-le-Hope are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Filters

Filters must be changed regularly to keep air flow and air quality up.

Working hours

Most Stanford-le-Hope businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Premises we work in around Stanford-le-Hope

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

Common questions from businesses in Stanford-le-Hope

How much does heat recovery ventilation cost in Stanford-le-Hope?

Guide prices in Stanford-le-Hope run from about £5,350 to £20,995 per unit installed, plus VAT. A typical job (heat recovery for a 100–200 m² office) costs £7,500–£15,650 plus VAT. We fix the price in writing after a free survey.

Do you also cover Basildon, Pitsea and Grays?

Yes. Alongside Stanford-le-Hope, we also cover Basildon, Pitsea and Grays. Each has its own page with local guide prices.

Which postcodes do you cover in Stanford-le-Hope?

All of them, including SS17. Give us your postcode when you enquire and we will confirm the visit details.

How efficient is heat recovery ventilation?

Commercial units commonly recover the majority of the heat in the extract air, depending on the unit type and conditions. We give the figures for the unit we propose.

Is MVHR noisy?

Correctly sized units and ductwork are quiet. Noise usually comes from undersized ducts or high fan speeds.

Need heat recovery ventilation in Stanford-le-Hope?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote