Split and multi-split systems in Ashford, Kent
Split and multi-split air conditioning in Ashford, Kent, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a split air conditioning system cost in Ashford, Kent?
Budget roughly £1,650–£3,395 per system ex VAT in Ashford, Kent. For a typical job — two-room multi-split — expect £3,950–£6,850 plus VAT. You get a fixed written quote after the free survey.
A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.
Our coverage in Ashford, Kent
Ashford, Kent is a large town in Kent, with a busy centre, retail parks and industrial estates on its edges. Maidstone is about 28 km away.
We cover every Ashford, Kent postcode, including EX31, SP6, TN24, TQ7 and TW15. We also cover Faversham, Canterbury and Folkestone, all within easy reach of Ashford, Kent. Buildings across Kent range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
What is included
- Wall-mounted, floor-standing or under-ceiling indoor units
- Outdoor unit on wall brackets, a flat roof frame or ground mounts
- Pipework in neat trunking or concealed routes
- Condensate drainage
- Commissioning, remote or wired controls and F-gas records
Guide prices in Ashford, Kent
Prices below include our regional adjustment for the South East (15% above the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single split 2.5–3.5 kW | £1,650–£2,795 | £1,980–£3,354 | per system |
| Single split 5–7 kW | £2,250–£3,395 | £2,700–£4,074 | per system |
| Multi-split, 2 indoor units | £3,950–£6,850 | £4,740–£8,220 | per system |
| Multi-split, 3–4 indoor units | £5,695–£11,450 | £6,834–£13,740 | per system |
| Extra pipework beyond 5 m | £40–£75 | £48–£90 | per metre |
Ex VAT, supply and install with standard access.
From enquiry to handover in Ashford, Kent
Survey
We size the unit to the room and agree indoor and outdoor positions and the pipe route.
Mount the units
Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.
Pipe and wire
Pipework, interconnecting cable and condensate are run and made off neatly. We keep work areas in Ashford, Kent screened and tidy at the end of each day.
Test and commission
Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.
Before you book in Ashford, Kent
Refrigerant rules
Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.
Access and parking
Town-centre jobs in Ashford, Kent often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Pipe routes
Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Who we work with in Ashford, Kent
- Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
- Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
- Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
- Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
FAQs for Ashford, Kent
How much does a split air conditioning system cost in Ashford, Kent?
Guide prices in Ashford, Kent run from about £1,650 to £3,395 per system, plus VAT. A typical job (two-room multi-split) costs £3,950–£6,850 plus VAT. We fix the price in writing after a free survey.
Do you also cover Faversham, Canterbury and Folkestone?
Yes. Alongside Ashford, Kent, we also cover Faversham, Canterbury and Folkestone. Each has its own page with local guide prices.
Which postcodes do you cover in Ashford, Kent?
All of them, including EX31, SP6, TN24 and TQ7. Give us your postcode when you enquire and we will confirm the visit details.
How long does it take to fit?
A single split is usually fitted in a day; a multi-split in one to two days.
How much does a split air conditioning system cost for a business?
A single wall-mounted split typically costs £1,450–£2,950 plus VAT installed. Multi-splits with two to four indoor units are typically £3,450–£9,950 plus VAT.
Get a guide price for Ashford, Kent
Free survey and fixed written quote. We reply with a guide price or to book the survey.