0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Billingham

A free survey, a clear specification and a fixed price for split and multi-split air conditioning in Billingham.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Billingham?

Our guide range in Billingham is £1,350–£2,750 per system before VAT; a typical job (two-room multi-split) is £3,250–£5,595 plus VAT. You get a fixed written quote after the free survey.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Working in Billingham

In Billingham, typical premises are high-street shops, offices above them, surgeries, salons and local industrial units. Middlesbrough is about 4 km away.

Postcode districts we cover in Billingham include TS23. We also cover Stockton-on-Tees, Middlesbrough and Yarm, all within easy reach of Billingham. Buildings across County Durham range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

What the job covers

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Pipework in neat trunking or concealed routes
  • Condensate drainage

Prices in Billingham

Guide prices for Billingham, set for the North East. Your fixed price comes in writing.

Split systems guide prices, Billingham
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,350–£2,295£1,620–£2,754per system
Single split 5–7 kW£1,850–£2,750£2,220–£3,300per system
Multi-split, 2 indoor units£3,250–£5,595£3,900–£6,714per system
Multi-split, 3–4 indoor units£4,650–£9,350£5,580–£11,220per system
Extra pipework beyond 5 m£35–£60£42–£72per metre

Ex VAT, supply and install with standard access.

How a job in Billingham works

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly. We keep work areas in Billingham screened and tidy at the end of each day.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Local points to consider

Refrigerant rules

Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

One outdoor unit, many rooms

Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.

Conservation areas

Historic streets and listed buildings in and around Billingham are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Premises we work in around Billingham

  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
  • Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
  • Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.

Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.

FAQs for Billingham

How much does a split air conditioning system cost in Billingham?

Guide prices in Billingham run from about £1,350 to £2,750 per system, plus VAT. A typical job (two-room multi-split) costs £3,250–£5,595 plus VAT. We fix the price in writing after a free survey.

Do you also cover Stockton-on-Tees, Middlesbrough and Yarm?

Yes. Alongside Billingham, we also cover Stockton-on-Tees, Middlesbrough and Yarm. Each has its own page with local guide prices.

Which postcodes do you cover in Billingham?

All of them, including TS23. Give us your postcode when you enquire and we will confirm the visit details.

Does a small split need F-gas leak checks?

It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.

How much does a split air conditioning system cost for a business?

A single wall-mounted split typically costs £1,450–£2,950 plus VAT installed. Multi-splits with two to four indoor units are typically £3,450–£9,950 plus VAT.

Get a guide price for Billingham

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote