0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Blyth

Split and multi-split air conditioning for businesses in Blyth — surveyed, designed and priced in writing before any work starts.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Blyth?

In Blyth, guide prices run from about £1,350 to £2,750 per system, plus VAT. A typical job (two-room multi-split) usually comes to £3,250–£5,595 plus VAT. Your exact price is fixed in writing once we have surveyed.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Where we work around Blyth

Businesses in Blyth range from independent shops and restaurants to offices, clinics and warehouses. Newcastle upon Tyne is about 18 km away.

Postcode districts we cover in Blyth include NE24 and S81. We also cover Bedlington, Ashington and Cramlington, all within easy reach of Blyth. Buildings across Northumberland range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

What is included

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Pipework in neat trunking or concealed routes
  • Condensate drainage
  • Commissioning, remote or wired controls and F-gas records

Local guide prices for Blyth

These guide prices are adjusted for the North East, where labour and access costs run about 6% below the UK guide.

Split systems guide prices, Blyth
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,350–£2,295£1,620–£2,754per system
Single split 5–7 kW£1,850–£2,750£2,220–£3,300per system
Multi-split, 2 indoor units£3,250–£5,595£3,900–£6,714per system
Multi-split, 3–4 indoor units£4,650–£9,350£5,580–£11,220per system
Extra pipework beyond 5 m£35–£60£42–£72per metre

Ex VAT, supply and install with standard access.

How it works in Blyth

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route. For sites in Blyth we confirm access and parking beforehand.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Local points to consider

One outdoor unit, many rooms

Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.

Neighbours and noise

Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.

Refrigerant rules

Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.

Conservation areas

Historic streets and listed buildings in and around Blyth are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Premises we work in around Blyth

  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
  • Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
  • Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Your questions answered

How much does a split air conditioning system cost in Blyth?

Guide prices in Blyth run from about £1,350 to £2,750 per system, plus VAT. A typical job (two-room multi-split) costs £3,250–£5,595 plus VAT. We fix the price in writing after a free survey.

Do you also cover Bedlington, Ashington and Cramlington?

Yes. Alongside Blyth, we also cover Bedlington, Ashington and Cramlington. Each has its own page with local guide prices.

Which postcodes do you cover in Blyth?

All of them, including NE24 and S81. Give us your postcode when you enquire and we will confirm the visit details.

Does a small split need F-gas leak checks?

It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.

How long does it take to fit?

A single split is usually fitted in a day; a multi-split in one to two days.

Need split and multi-split air conditioning in Blyth?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote