0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Bolton

A free survey, a clear specification and a fixed price for split and multi-split air conditioning in Bolton.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Bolton?

Our guide range in Bolton is £1,395–£2,895 per system before VAT; a typical job (two-room multi-split) is £3,395–£5,850 plus VAT. Your exact price is fixed in writing once we have surveyed.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Working in Bolton

Bolton is a large town in Greater Manchester, with a busy centre, retail parks and industrial estates on its edges. Wigan is about 14 km away.

That includes premises in BL1, BL11, BL78, CA16 and NE66 and the surrounding districts. We also cover Farnworth, Westhoughton and Radcliffe, all within easy reach of Bolton. In Bolton, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.

What we do

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Condensate drainage
  • Commissioning, remote or wired controls and F-gas records

Split systems prices in Bolton

Guide prices for Bolton, set for the North West. Your fixed price comes in writing.

Split systems guide prices, Bolton
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,395–£2,395£1,674–£2,874per system
Single split 5–7 kW£1,895–£2,895£2,274–£3,474per system
Multi-split, 2 indoor units£3,395–£5,850£4,074–£7,020per system
Multi-split, 3–4 indoor units£4,850–£9,750£5,820–£11,700per system
Extra pipework beyond 5 m£35–£65£42–£78per metre

Ex VAT, supply and install with standard access.

How we work in Bolton

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly. We keep work areas in Bolton screened and tidy at the end of each day.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Points to plan for in Bolton

Refrigerant rules

Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.

Neighbours and noise

Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.

Pipe routes

Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.

Access and parking

Town-centre jobs in Bolton often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.

Premises we work in around Bolton

  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
  • Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

FAQs for Bolton

How much does a split air conditioning system cost in Bolton?

Guide prices in Bolton run from about £1,395 to £2,895 per system, plus VAT. A typical job (two-room multi-split) costs £3,395–£5,850 plus VAT. We fix the price in writing after a free survey.

Do you also cover Farnworth, Westhoughton and Radcliffe?

Yes. Alongside Bolton, we also cover Farnworth, Westhoughton and Radcliffe. Each has its own page with local guide prices.

Which postcodes do you cover in Bolton?

All of them, including BL1, BL11, BL78 and CA16. Give us your postcode when you enquire and we will confirm the visit details.

Does a small split need F-gas leak checks?

It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.

How much does a split air conditioning system cost for a business?

A single wall-mounted split typically costs £1,450–£2,950 plus VAT installed. Multi-splits with two to four indoor units are typically £3,450–£9,950 plus VAT.

Talk to us about your premises in Bolton

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote