0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Bristol

From a single room to a whole floor: split and multi-split air conditioning in Bristol, planned around your trading hours.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Bristol?

Budget roughly £1,500–£3,050 per system ex VAT in Bristol. For a typical job — two-room multi-split — expect £3,595–£6,195 plus VAT. The fixed price follows a free survey.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Where we work around Bristol

We cover all of Bristol, from the centre to the business parks and industrial estates on its edges. Each town below has its own page with local guide prices.

Postcode districts we cover include BS0, BS2, BS4, BS6, BS9, BS11, BS16 and BS99. In Bristol, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.

What is included

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Condensate drainage
  • Commissioning, remote or wired controls and F-gas records

Local guide prices for Bristol

Prices below include our regional adjustment for the South West (4% above the UK guide).

Split systems guide prices, Bristol
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,500–£2,550£1,800–£3,060per system
Single split 5–7 kW£2,050–£3,050£2,460–£3,660per system
Multi-split, 2 indoor units£3,595–£6,195£4,314–£7,434per system
Multi-split, 3–4 indoor units£5,150–£10,350£6,180–£12,420per system
Extra pipework beyond 5 m£35–£70£42–£84per metre

Ex VAT, supply and install with standard access.

How it works in Bristol

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly. In Bristol we agree timings around your opening hours.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

What to think about in Bristol

Refrigerant rules

Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.

Leased premises

If your Bristol premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

One outdoor unit, many rooms

Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.

Conservation areas

Historic streets and listed buildings in and around Bristol are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Premises we work in around Bristol

  • Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

Questions about split systems in Bristol

How much does a split air conditioning system cost in Bristol?

Guide prices in Bristol run from about £1,500 to £3,050 per system, plus VAT. A typical job (two-room multi-split) costs £3,595–£6,195 plus VAT. We fix the price in writing after a free survey.

How long does it take to fit?

A single split is usually fitted in a day; a multi-split in one to two days.

Can a split system heat in winter?

Yes. Modern split systems are heat pumps and can heat efficiently down to well below freezing.

Talk to us about your premises in Bristol

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote