0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Chippenham

Split and multi-split air conditioning in Chippenham, sized to the real heat load of your premises rather than guessed from the floor area.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Chippenham?

Our guide range in Chippenham is £1,500–£3,050 per system before VAT; a typical job (two-room multi-split) is £3,595–£6,195 plus VAT. You get a fixed written quote after the free survey.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Where we work around Chippenham

Chippenham has a compact centre of shops, cafés and offices, with business units on its outskirts. Bath is about 19 km away.

Postcode districts we cover in Chippenham include CB7 and SN15. Neighbouring towns we cover include Melksham, Trowbridge and Bath. For split and multi-split air conditioning in Chippenham, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.

What the job covers

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Pipework in neat trunking or concealed routes
  • Commissioning, remote or wired controls and F-gas records

Split systems prices in Chippenham

These guide prices are adjusted for the South West, where labour and access costs run about 4% above the UK guide.

Split systems guide prices, Chippenham
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,500–£2,550£1,800–£3,060per system
Single split 5–7 kW£2,050–£3,050£2,460–£3,660per system
Multi-split, 2 indoor units£3,595–£6,195£4,314–£7,434per system
Multi-split, 3–4 indoor units£5,150–£10,350£6,180–£12,420per system
Extra pipework beyond 5 m£35–£70£42–£84per metre

Ex VAT, supply and install with standard access.

How a job in Chippenham works

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly. In Chippenham we agree timings around your opening hours.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Points to plan for in Chippenham

Pipe routes

Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.

Conservation areas

Historic streets and listed buildings in and around Chippenham are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Outdoor unit position

Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.

Leased premises

If your Chippenham premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

Who we work with in Chippenham

  • Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
  • Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Your questions answered

How much does a split air conditioning system cost in Chippenham?

Guide prices in Chippenham run from about £1,500 to £3,050 per system, plus VAT. A typical job (two-room multi-split) costs £3,595–£6,195 plus VAT. We fix the price in writing after a free survey.

Do you also cover Melksham, Trowbridge and Bath?

Yes. Alongside Chippenham, we also cover Melksham, Trowbridge and Bath. Each has its own page with local guide prices.

Which postcodes do you cover in Chippenham?

All of them, including CB7 and SN15. Give us your postcode when you enquire and we will confirm the visit details.

Does a small split need F-gas leak checks?

It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.

How long does it take to fit?

A single split is usually fitted in a day; a multi-split in one to two days.

Talk to us about your premises in Chippenham

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote