Split and multi-split systems in Ebbw Vale
Split and multi-split air conditioning in Ebbw Vale, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a split air conditioning system cost in Ebbw Vale?
Our guide range in Ebbw Vale is £1,395–£2,795 per system before VAT; a typical job (two-room multi-split) is £3,295–£5,650 plus VAT. You get a fixed written quote after the free survey.
A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.
Our coverage in Ebbw Vale
In Ebbw Vale, typical premises are high-street shops, offices above them, surgeries, salons and local industrial units. Newport, Gwent is about 26 km away.
Postcode districts we cover in Ebbw Vale include NP23. Neighbouring towns we cover include Merthyr Tydfil, Blackwood and Gelligaer. We plan installations in Ebbw Vale so the noisy work — core drilling, ceiling access, lifting plant — happens when it disturbs your business least.
Included as standard
- Survey and unit sizing
- Wall-mounted, floor-standing or under-ceiling indoor units
- Outdoor unit on wall brackets, a flat roof frame or ground mounts
- Pipework in neat trunking or concealed routes
- Condensate drainage
Split systems prices in Ebbw Vale
These guide prices are adjusted for Wales, where labour and access costs run about 5% below the UK guide.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single split 2.5–3.5 kW | £1,395–£2,350 | £1,674–£2,820 | per system |
| Single split 5–7 kW | £1,850–£2,795 | £2,220–£3,354 | per system |
| Multi-split, 2 indoor units | £3,295–£5,650 | £3,954–£6,780 | per system |
| Multi-split, 3–4 indoor units | £4,695–£9,450 | £5,634–£11,340 | per system |
| Extra pipework beyond 5 m | £35–£60 | £42–£72 | per metre |
Ex VAT, supply and install with standard access.
How we work in Ebbw Vale
Survey
We size the unit to the room and agree indoor and outdoor positions and the pipe route.
Mount the units
Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.
Pipe and wire
Pipework, interconnecting cable and condensate are run and made off neatly. We keep work areas in Ebbw Vale screened and tidy at the end of each day.
Test and commission
Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.
Before you book in Ebbw Vale
Pipe routes
Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.
Access and parking
Town-centre jobs in Ebbw Vale often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Refrigerant rules
Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.
Leased premises
If your Ebbw Vale premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Premises we work in around Ebbw Vale
- Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
- Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
- Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
- Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
Compliance in Wales: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
FAQs for Ebbw Vale
How much does a split air conditioning system cost in Ebbw Vale?
Guide prices in Ebbw Vale run from about £1,395 to £2,795 per system, plus VAT. A typical job (two-room multi-split) costs £3,295–£5,650 plus VAT. We fix the price in writing after a free survey.
Do you also cover Merthyr Tydfil, Blackwood and Gelligaer?
Yes. Alongside Ebbw Vale, we also cover Merthyr Tydfil, Blackwood and Gelligaer. Each has its own page with local guide prices.
Which postcodes do you cover in Ebbw Vale?
All of them, including NP23. Give us your postcode when you enquire and we will confirm the visit details.
How long does it take to fit?
A single split is usually fitted in a day; a multi-split in one to two days.
Does a small split need F-gas leak checks?
It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.
Talk to us about your premises in Ebbw Vale
Free survey and fixed written quote. We reply with a guide price or to book the survey.