0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Eltham

Cooling and heating for offices, shops and hospitality venues in Eltham, with a free site survey and a fixed written quote.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Eltham?

In Eltham, guide prices run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) usually comes to £4,395–£7,595 plus VAT. Your exact price is fixed in writing once we have surveyed.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Eltham and surrounding areas

In Eltham, commercial premises range from street-level shops and restaurants to offices in converted and modern buildings, many with managing agents and landlord consents to work through.

We work across Eltham's postcode districts, including SE9. Nearby, we also cover Blackheath (about 3 km), Welling (about 4 km) and Catford (about 5 km). We plan installations in Eltham so the noisy work — core drilling, ceiling access, lifting plant — happens when it disturbs your business least.

What we do

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Pipework in neat trunking or concealed routes
  • Condensate drainage

Local guide prices for Eltham

These guide prices are adjusted for London, where labour and access costs run about 28% above the UK guide.

Split systems guide prices, Eltham
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,850–£3,150£2,220–£3,780per system
Single split 5–7 kW£2,500–£3,795£3,000–£4,554per system
Multi-split, 2 indoor units£4,395–£7,595£5,274–£9,114per system
Multi-split, 3–4 indoor units£6,350–£12,750£7,620–£15,300per system
Extra pipework beyond 5 m£45–£85£54–£102per metre

Ex VAT, supply and install with standard access.

The steps for a project in Eltham

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly. We keep work areas in Eltham screened and tidy at the end of each day.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Before you book in Eltham

Outdoor unit position

Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.

Leased premises

If your Eltham premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

Pipe routes

Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.

Conservation areas

Historic streets and listed buildings in and around Eltham are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Typical premises in Eltham

  • Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
  • Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Common questions from businesses in Eltham

How much does a split air conditioning system cost in Eltham?

Guide prices in Eltham run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) costs £4,395–£7,595 plus VAT. We fix the price in writing after a free survey.

Do you also cover Blackheath, Welling and Catford?

Yes. Alongside Eltham, we also cover Blackheath, Welling and Catford. Each has its own page with local guide prices.

Which postcodes do you cover in Eltham?

All of them, including SE9. Give us your postcode when you enquire and we will confirm the visit details.

Does a small split need F-gas leak checks?

It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.

How long does it take to fit?

A single split is usually fitted in a day; a multi-split in one to two days.

Talk to us about your premises in Eltham

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote