Split and multi-split systems in Ilford
From a single room to a whole floor: split and multi-split air conditioning in Ilford, planned around your trading hours.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a split air conditioning system cost in Ilford?
Budget roughly £1,850–£3,795 per system ex VAT in Ilford. For a typical job — two-room multi-split — expect £4,395–£7,595 plus VAT. You get a fixed written quote after the free survey.
A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.
Covering Ilford and nearby
In Ilford, commercial premises range from street-level shops and restaurants to offices in converted and modern buildings, many with managing agents and landlord consents to work through.
We cover every Ilford postcode, including IG1, IG4 and IG5. We also work in nearby Barking, Leytonstone and Stratford. In Ilford, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.
Included as standard
- Survey and unit sizing
- Wall-mounted, floor-standing or under-ceiling indoor units
- Pipework in neat trunking or concealed routes
- Condensate drainage
- Commissioning, remote or wired controls and F-gas records
Guide prices in Ilford
Prices below include our regional adjustment for London (28% above the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single split 2.5–3.5 kW | £1,850–£3,150 | £2,220–£3,780 | per system |
| Single split 5–7 kW | £2,500–£3,795 | £3,000–£4,554 | per system |
| Multi-split, 2 indoor units | £4,395–£7,595 | £5,274–£9,114 | per system |
| Multi-split, 3–4 indoor units | £6,350–£12,750 | £7,620–£15,300 | per system |
| Extra pipework beyond 5 m | £45–£85 | £54–£102 | per metre |
Ex VAT, supply and install with standard access.
The steps for a project in Ilford
Survey
We size the unit to the room and agree indoor and outdoor positions and the pipe route. For sites in Ilford we confirm access and parking beforehand.
Mount the units
Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.
Pipe and wire
Pipework, interconnecting cable and condensate are run and made off neatly.
Test and commission
Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.
Points to plan for in Ilford
One outdoor unit, many rooms
Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.
Conservation areas
Historic streets and listed buildings in and around Ilford are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.
Pipe routes
Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.
Leased premises
If your Ilford premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Premises we work in around Ilford
- Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
- Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
- Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
- Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.
FAQs for Ilford
How much does a split air conditioning system cost in Ilford?
Guide prices in Ilford run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) costs £4,395–£7,595 plus VAT. We fix the price in writing after a free survey.
Do you also cover Barking, Leytonstone and Stratford?
Yes. Alongside Ilford, we also cover Barking, Leytonstone and Stratford. Each has its own page with local guide prices.
Which postcodes do you cover in Ilford?
All of them, including IG1, IG4 and IG5. Give us your postcode when you enquire and we will confirm the visit details.
Does a small split need F-gas leak checks?
It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.
Single split or multi-split?
Separate singles are more resilient and can be cheaper for two rooms; a multi-split saves outdoor space. We price both where it is close.
Talk to us about your premises in Ilford
Free survey and fixed written quote. We reply with a guide price or to book the survey.