Split and multi-split systems in Melton Mowbray
Cooling and heating for offices, shops and hospitality venues in Melton Mowbray, with a free site survey and a fixed written quote.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a split air conditioning system cost in Melton Mowbray?
Budget roughly £1,395–£2,895 per system ex VAT in Melton Mowbray. For a typical job — two-room multi-split — expect £3,395–£5,850 plus VAT. Your exact price is fixed in writing once we have surveyed.
A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.
Our coverage in Melton Mowbray
Businesses in Melton Mowbray range from independent shops and restaurants to offices, clinics and warehouses. Leicester is about 22 km away.
Postcode districts we cover in Melton Mowbray include LE13. Nearby, we also cover Oakham (about 15 km), Loughborough (about 21 km) and Leicester (about 22 km). For split and multi-split air conditioning in Melton Mowbray, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.
Included as standard
- Survey and unit sizing
- Outdoor unit on wall brackets, a flat roof frame or ground mounts
- Pipework in neat trunking or concealed routes
- Condensate drainage
- Commissioning, remote or wired controls and F-gas records
Guide prices in Melton Mowbray
Guide prices for Melton Mowbray, set for the East Midlands. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single split 2.5–3.5 kW | £1,395–£2,395 | £1,674–£2,874 | per system |
| Single split 5–7 kW | £1,895–£2,895 | £2,274–£3,474 | per system |
| Multi-split, 2 indoor units | £3,395–£5,850 | £4,074–£7,020 | per system |
| Multi-split, 3–4 indoor units | £4,850–£9,750 | £5,820–£11,700 | per system |
| Extra pipework beyond 5 m | £35–£65 | £42–£78 | per metre |
Ex VAT, supply and install with standard access.
How a job in Melton Mowbray works
Survey
We size the unit to the room and agree indoor and outdoor positions and the pipe route.
Mount the units
Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.
Pipe and wire
Pipework, interconnecting cable and condensate are run and made off neatly. We keep work areas in Melton Mowbray screened and tidy at the end of each day.
Test and commission
Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.
Local points to consider
One outdoor unit, many rooms
Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.
Leased premises
If your Melton Mowbray premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Refrigerant rules
Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.
Working hours
Most Melton Mowbray businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.
Premises we work in around Melton Mowbray
- Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
- Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
- Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
- Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
FAQs for Melton Mowbray
How much does a split air conditioning system cost in Melton Mowbray?
Guide prices in Melton Mowbray run from about £1,395 to £2,895 per system, plus VAT. A typical job (two-room multi-split) costs £3,395–£5,850 plus VAT. We fix the price in writing after a free survey.
Do you also cover Oakham, Loughborough and Leicester?
Yes. Alongside Melton Mowbray, we also cover Oakham, Loughborough and Leicester. Each has its own page with local guide prices.
Which postcodes do you cover in Melton Mowbray?
All of them, including LE13. Give us your postcode when you enquire and we will confirm the visit details.
Does a small split need F-gas leak checks?
It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.
How long does it take to fit?
A single split is usually fitted in a day; a multi-split in one to two days.
Talk to us about your premises in Melton Mowbray
Free survey and fixed written quote. We reply with a guide price or to book the survey.