0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Powys

Cooling and heating for offices, shops and hospitality venues in Powys, with a free site survey and a fixed written quote.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Powys?

Budget roughly £1,395–£2,795 per system ex VAT in Powys. For a typical job — two-room multi-split — expect £3,295–£5,650 plus VAT. Your exact price is fixed in writing once we have surveyed.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Where we work around Powys

We cover all of Powys, including Newtown, Brecon, Welshpool and Llandrindod Wells. We quote for premises right across Powys, including rural and edge-of-town sites.

Postcode districts we cover include CF44, HR5, LD4, LD8, SA9, SY10, SY18 and SY22. For split and multi-split air conditioning in Powys, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.

What we do

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Pipework in neat trunking or concealed routes
  • Condensate drainage

Split systems prices in Powys

Guide prices for Powys, set for Wales. Your fixed price comes in writing.

Split systems guide prices, Powys
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,395–£2,350£1,674–£2,820per system
Single split 5–7 kW£1,850–£2,795£2,220–£3,354per system
Multi-split, 2 indoor units£3,295–£5,650£3,954–£6,780per system
Multi-split, 3–4 indoor units£4,695–£9,450£5,634–£11,340per system
Extra pipework beyond 5 m£35–£60£42–£72per metre

Ex VAT, supply and install with standard access.

From enquiry to handover in Powys

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly. We keep work areas in Powys screened and tidy at the end of each day.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Before you book in Powys

Outdoor unit position

Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.

Conservation areas

Historic streets and listed buildings in and around Powys are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Refrigerant rules

Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Types of premises we cover in Powys

  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
  • Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.

Compliance in Wales: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

FAQs for Powys

How much does a split air conditioning system cost in Powys?

Guide prices in Powys run from about £1,395 to £2,795 per system, plus VAT. A typical job (two-room multi-split) costs £3,295–£5,650 plus VAT. We fix the price in writing after a free survey.

Do you also cover Dyfed and Gwent?

Yes. Alongside Powys, we also cover Dyfed and Gwent. Each has its own page with local guide prices.

Does a small split need F-gas leak checks?

It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.

Single split or multi-split?

Separate singles are more resilient and can be cheaper for two rooms; a multi-split saves outdoor space. We price both where it is close.

Get a guide price for Powys

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote