0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Shirley

From a single room to a whole floor: split and multi-split air conditioning in Shirley, planned around your trading hours.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Shirley?

In Shirley, guide prices run from about £1,450 to £2,950 per system, plus VAT. A typical job (two-room multi-split) usually comes to £3,450–£5,950 plus VAT. You get a fixed written quote after the free survey.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Where we work around Shirley

Businesses in Shirley range from independent shops and restaurants to offices, clinics and warehouses. Solihull is about 3 km away.

We work across Shirley's postcode districts, including B90, BH23, CR0, DE6 and SO15. We also work in nearby Solihull, Birmingham and Smethwick. In Shirley, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.

What the job covers

  • Survey and unit sizing
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Pipework in neat trunking or concealed routes
  • Condensate drainage
  • Commissioning, remote or wired controls and F-gas records

Split systems prices in Shirley

These guide prices are adjusted for the West Midlands, where labour and access costs run at about the UK guide level.

Split systems guide prices, Shirley
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,450–£2,450£1,740–£2,940per system
Single split 5–7 kW£1,950–£2,950£2,340–£3,540per system
Multi-split, 2 indoor units£3,450–£5,950£4,140–£7,140per system
Multi-split, 3–4 indoor units£4,950–£9,950£5,940–£11,940per system
Extra pipework beyond 5 m£35–£65£42–£78per metre

Ex VAT, supply and install with standard access.

How it works in Shirley

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route. For sites in Shirley we confirm access and parking beforehand.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Things to check in Shirley

Pipe routes

Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.

Neighbours and noise

Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.

One outdoor unit, many rooms

Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.

Conservation areas

Historic streets and listed buildings in and around Shirley are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Types of premises we cover in Shirley

  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
  • Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
  • Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Questions about split systems in Shirley

How much does a split air conditioning system cost in Shirley?

Guide prices in Shirley run from about £1,450 to £2,950 per system, plus VAT. A typical job (two-room multi-split) costs £3,450–£5,950 plus VAT. We fix the price in writing after a free survey.

Do you also cover Solihull, Birmingham and Smethwick?

Yes. Alongside Shirley, we also cover Solihull, Birmingham and Smethwick. Each has its own page with local guide prices.

Which postcodes do you cover in Shirley?

All of them, including B90, BH23, CR0 and DE6. Give us your postcode when you enquire and we will confirm the visit details.

Does a small split need F-gas leak checks?

It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.

Can a split system heat in winter?

Yes. Modern split systems are heat pumps and can heat efficiently down to well below freezing.

Get a guide price for Shirley

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote