0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Wellingborough

A free survey, a clear specification and a fixed price for split and multi-split air conditioning in Wellingborough.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Wellingborough?

Budget roughly £1,395–£2,895 per system ex VAT in Wellingborough. For a typical job — two-room multi-split — expect £3,395–£5,850 plus VAT. The fixed price follows a free survey.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Where we work around Wellingborough

In Wellingborough, typical premises are high-street shops, offices above them, surgeries, salons and local industrial units. Northampton is about 14 km away.

That includes premises in NN8 and the surrounding districts. We also work in nearby Rushden, Kettering and Northampton. In Wellingborough, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.

What the job covers

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Pipework in neat trunking or concealed routes
  • Condensate drainage

Split systems prices in Wellingborough

Prices below include our regional adjustment for the East Midlands (2% below the UK guide).

Split systems guide prices, Wellingborough
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,395–£2,395£1,674–£2,874per system
Single split 5–7 kW£1,895–£2,895£2,274–£3,474per system
Multi-split, 2 indoor units£3,395–£5,850£4,074–£7,020per system
Multi-split, 3–4 indoor units£4,850–£9,750£5,820–£11,700per system
Extra pipework beyond 5 m£35–£65£42–£78per metre

Ex VAT, supply and install with standard access.

From enquiry to handover in Wellingborough

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route. For sites in Wellingborough we confirm access and parking beforehand.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Local points to consider

Pipe routes

Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.

Leased premises

If your Wellingborough premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

Outdoor unit position

Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.

Neighbours and noise

Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.

Types of premises we cover in Wellingborough

  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
  • Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
  • Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Questions about split systems in Wellingborough

How much does a split air conditioning system cost in Wellingborough?

Guide prices in Wellingborough run from about £1,395 to £2,895 per system, plus VAT. A typical job (two-room multi-split) costs £3,395–£5,850 plus VAT. We fix the price in writing after a free survey.

Do you also cover Rushden, Kettering and Northampton?

Yes. Alongside Wellingborough, we also cover Rushden, Kettering and Northampton. Each has its own page with local guide prices.

Which postcodes do you cover in Wellingborough?

All of them, including NN8. Give us your postcode when you enquire and we will confirm the visit details.

How long does it take to fit?

A single split is usually fitted in a day; a multi-split in one to two days.

Does a small split need F-gas leak checks?

It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.

Need split and multi-split air conditioning in Wellingborough?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote