Commercial air conditioning installation in Corby
Commercial air conditioning installation in Corby, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does commercial air conditioning installation cost in Corby?
Budget roughly £1,895–£4,650 per indoor unit (zone) ex VAT in Corby. For a typical job — small shop or office, 2–4 indoor units — expect £4,850–£16,150 plus VAT. You get a fixed written quote after the free survey.
Commercial air conditioning installation is the design, supply, fitting and commissioning of a cooling (and usually heating) system for a business premises.
Our coverage in Corby
Corby is a large town in Northamptonshire, with a busy centre, retail parks and industrial estates on its edges. Northampton is about 30 km away.
That includes premises in NN17 and the surrounding districts. Nearby, we also cover Kettering (about 11 km), Market Harborough (about 16 km) and Oakham (about 19 km). Buildings across Northamptonshire range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
Included as standard
- Site survey and heat load calculation
- System and unit selection with a clear written specification
- Electrical supply and isolators by a qualified electrician
- Commissioning, controls set-up and a handover walk-through
- F-gas records, labelling and commissioning certificates
Local guide prices for Corby
Guide prices for Corby, set for the East Midlands. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single wall-mounted split (2.5–7 kW) | £1,395–£2,895 | £1,674–£3,474 | per system |
| Ceiling cassette | £2,095–£4,850 | £2,514–£5,820 | per unit |
| Multi-split, 2–4 indoor units | £3,395–£9,750 | £4,074–£11,700 | per system |
| Ducted indoor unit with grilles | £3,395–£7,795 | £4,074–£9,354 | per unit |
| Electrical supply and isolator | £240–£780 | £288–£936 | per system |
Ex VAT, supply and install, standard access and up to about 5 m of pipework per unit.
How a job in Corby works
Survey
We measure the space, check the ceiling void, wall construction, glazing and occupancy, and agree where indoor and outdoor units can go.
Design and quote
You get a written specification with unit sizes, positions, pipe routes and a fixed price — plus any planning, landlord or noise points to resolve first.
First fix
Pipework, cabling and condensate runs go in, usually above ceilings or in neat trunking, before the units are hung. We keep work areas in Corby screened and tidy at the end of each day.
Install and test
Indoor and outdoor units are fitted, the system is pressure tested with nitrogen, evacuated and charged with refrigerant.
Commission and hand over
We set up controls, check air flows and temperatures, show your team how to use it and hand over the F-gas and commissioning paperwork.
Before you book in Corby
Landlord consent
Most commercial leases need the landlord's written consent before external units or wall penetrations go in. We can provide drawings and unit data sheets for the request.
Roof and height work
Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.
Condensate
Every cooling unit produces water. We route it to a drain by gravity where possible and fit a quiet condensate pump where not.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Who we work with in Corby
- Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Your questions answered
How much does commercial air conditioning installation cost in Corby?
Guide prices in Corby run from about £1,895 to £4,650 per indoor unit (zone), plus VAT. A typical job (small shop or office, 2–4 indoor units) costs £4,850–£16,150 plus VAT. We fix the price in writing after a free survey.
Do you also cover Kettering, Market Harborough and Oakham?
Yes. Alongside Corby, we also cover Kettering, Market Harborough and Oakham. Each has its own page with local guide prices.
Which postcodes do you cover in Corby?
All of them, including NN17. Give us your postcode when you enquire and we will confirm the visit details.
Can you install while we stay open?
Usually, yes. We plan noisy or messy work (ceiling access, core drilling) for quiet periods, early starts or out of hours, and keep work areas screened and clean.
What warranty do I get?
Manufacturer warranties vary by brand and model and usually depend on the system being serviced at the intervals the manufacturer sets. We give you the warranty terms for the equipment we quote.
Talk to us about your premises in Corby
Free survey and fixed written quote. We reply with a guide price or to book the survey.