0800 088 6248
Engineer fitting a concealed ducted air conditioning unit above an open ceiling with slot diffusers

Ducted air conditioning in Corby

A free survey, a clear specification and a fixed price for ducted air conditioning in Corby.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does ducted air conditioning cost in Corby?

Budget roughly £3,395–£7,795 per ducted zone ex VAT in Corby. For a typical job — reception or boardroom with one ducted zone — expect £3,850–£7,795 plus VAT. You get a fixed written quote after the free survey.

Ducted air conditioning uses an indoor unit hidden in the ceiling void or a plant space, connected by ductwork to grilles or slot diffusers in the room.

Where we work around Corby

Corby is a large town in Northamptonshire, with a busy centre, retail parks and industrial estates on its edges. Northampton is about 30 km away.

Postcode districts we cover in Corby include NN17. Neighbouring towns we cover include Kettering, Market Harborough and Oakham. Buildings across Northamptonshire range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

What the job covers

  • Survey of void depth and duct routes
  • Ducted unit selection by capacity and external static pressure
  • Access panel for servicing
  • Pipework, condensate and controls
  • Air-flow balancing and commissioning

Guide prices in Corby

These guide prices are adjusted for the East Midlands, where labour and access costs run about 2% below the UK guide.

Ducted AC guide prices, Corby
ItemGuide price (ex VAT)Inc VATBasis
Low-profile ducted unit (up to about 7 kW)£3,395–£5,850£4,074–£7,020per zone
Medium static ducted unit (7–14 kW)£4,850–£7,795£5,820–£9,354per zone
Linear slot diffuser£140–£385£168–£462per metre
Access panel and ceiling making good£140–£485£168–£582per unit

Ex VAT, supply and install including standard ductwork.

How a job in Corby works

  1. Survey and route

    We check void depths and plan routes for supply and return ductwork.

  2. Design the air side

    Grille sizes and positions are chosen for even air flow and low noise.

  3. Install unit and ducts

    The unit is hung with access for servicing; ductwork and grilles are fitted. We keep work areas in Corby screened and tidy at the end of each day.

  4. Balance and commission

    Air flows are measured and balanced, then the system is commissioned.

Things to check in Corby

Void depth

Low-profile ducted units can fit voids of around 250 mm, but ductwork adds depth. We measure the route as well as the unit position.

Working hours

Most Corby businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Return air

Every ducted unit needs a return air path; we design it rather than rely on gaps under doors.

Conservation areas

Historic streets and listed buildings in and around Corby are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Who we work with in Corby

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

FAQs for Corby

How much does ducted air conditioning cost in Corby?

Guide prices in Corby run from about £3,395 to £7,795 per ducted zone, plus VAT. A typical job (reception or boardroom with one ducted zone) costs £3,850–£7,795 plus VAT. We fix the price in writing after a free survey.

Do you also cover Kettering, Market Harborough and Oakham?

Yes. Alongside Corby, we also cover Kettering, Market Harborough and Oakham. Each has its own page with local guide prices.

Which postcodes do you cover in Corby?

All of them, including NN17. Give us your postcode when you enquire and we will confirm the visit details.

Is ducted air conditioning more expensive?

Usually a little more than a cassette of the same capacity, because of the ductwork, grilles and access panel. In return you get a much cleaner ceiling.

How much ceiling void is needed?

Low-profile units can work in around 250–300 mm, but the duct route often needs more. We measure at survey.

Need ducted air conditioning in Corby?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote