0800 088 6248
Engineer fitting a concealed ducted air conditioning unit above an open ceiling with slot diffusers

Ducted air conditioning in Fleet

Ducted air conditioning in Fleet, sized to the real heat load of your premises rather than guessed from the floor area.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does ducted air conditioning cost in Fleet?

Budget roughly £3,950–£9,150 per ducted zone ex VAT in Fleet. For a typical job — reception or boardroom with one ducted zone — expect £4,550–£9,150 plus VAT. The fixed price follows a free survey.

Ducted air conditioning uses an indoor unit hidden in the ceiling void or a plant space, connected by ductwork to grilles or slot diffusers in the room.

Where we work around Fleet

Businesses in Fleet range from independent shops and restaurants to offices, clinics and warehouses. Basingstoke is about 18 km away.

We cover every Fleet postcode, including GU13, GU51, GU52 and PE12. Neighbouring towns we cover include Farnborough, Aldershot and Yateley. For ducted air conditioning in Fleet, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.

What is included

  • Ducted unit selection by capacity and external static pressure
  • Supply and return ductwork, plenums and grilles
  • Access panel for servicing
  • Pipework, condensate and controls
  • Air-flow balancing and commissioning

Prices in Fleet

Prices below include our regional adjustment for the South East (15% above the UK guide).

Ducted AC guide prices, Fleet
ItemGuide price (ex VAT)Inc VATBasis
Low-profile ducted unit (up to about 7 kW)£3,950–£6,850£4,740–£8,220per zone
Medium static ducted unit (7–14 kW)£5,695–£9,150£6,834–£10,980per zone
Linear slot diffuser£165–£455£198–£546per metre
Access panel and ceiling making good£165–£570£198–£684per unit

Ex VAT, supply and install including standard ductwork.

How it works in Fleet

  1. Survey and route

    We check void depths and plan routes for supply and return ductwork.

  2. Design the air side

    Grille sizes and positions are chosen for even air flow and low noise.

  3. Install unit and ducts

    The unit is hung with access for servicing; ductwork and grilles are fitted. In Fleet we agree timings around your opening hours.

  4. Balance and commission

    Air flows are measured and balanced, then the system is commissioned.

Before you book in Fleet

Noise

Duct sizes and grille velocities are chosen to keep noise down in quiet rooms.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Access

Filters and the unit need access for servicing — an access panel is non-negotiable.

Conservation areas

Historic streets and listed buildings in and around Fleet are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Types of premises we cover in Fleet

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

Your questions answered

How much does ducted air conditioning cost in Fleet?

Guide prices in Fleet run from about £3,950 to £9,150 per ducted zone, plus VAT. A typical job (reception or boardroom with one ducted zone) costs £4,550–£9,150 plus VAT. We fix the price in writing after a free survey.

Do you also cover Farnborough, Aldershot and Yateley?

Yes. Alongside Fleet, we also cover Farnborough, Aldershot and Yateley. Each has its own page with local guide prices.

Which postcodes do you cover in Fleet?

All of them, including GU13, GU51, GU52 and PE12. Give us your postcode when you enquire and we will confirm the visit details.

How much ceiling void is needed?

Low-profile units can work in around 250–300 mm, but the duct route often needs more. We measure at survey.

Can one ducted unit serve several rooms?

It can, but every room then shares one thermostat. Rooms with different uses are better on separate units or zones.

Get a guide price for Fleet

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote