0800 088 6248
Engineer fitting a concealed ducted air conditioning unit above an open ceiling with slot diffusers

Ducted air conditioning in Whitstable

Cooling and heating for offices, shops and hospitality venues in Whitstable, with a free site survey and a fixed written quote.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does ducted air conditioning cost in Whitstable?

Our guide range in Whitstable is £3,950–£9,150 per ducted zone before VAT; a typical job (reception or boardroom with one ducted zone) is £4,550–£9,150 plus VAT. You get a fixed written quote after the free survey.

Ducted air conditioning uses an indoor unit hidden in the ceiling void or a plant space, connected by ductwork to grilles or slot diffusers in the room.

Whitstable and surrounding areas

Whitstable has a compact centre of shops, cafés and offices, with business units on its outskirts. Southend-on-Sea is about 29 km away.

That includes premises in CT5 and the surrounding districts. We also work in nearby Herne Bay, Canterbury and Faversham. Ducted air conditioning in Whitstable is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.

What we do

  • Survey of void depth and duct routes
  • Ducted unit selection by capacity and external static pressure
  • Supply and return ductwork, plenums and grilles
  • Access panel for servicing
  • Pipework, condensate and controls

Local guide prices for Whitstable

Guide prices for Whitstable, set for the South East. Your fixed price comes in writing.

Ducted AC guide prices, Whitstable
ItemGuide price (ex VAT)Inc VATBasis
Low-profile ducted unit (up to about 7 kW)£3,950–£6,850£4,740–£8,220per zone
Medium static ducted unit (7–14 kW)£5,695–£9,150£6,834–£10,980per zone
Linear slot diffuser£165–£455£198–£546per metre
Access panel and ceiling making good£165–£570£198–£684per unit

Ex VAT, supply and install including standard ductwork.

How we work in Whitstable

  1. Survey and route

    We check void depths and plan routes for supply and return ductwork. For sites in Whitstable we confirm access and parking beforehand.

  2. Design the air side

    Grille sizes and positions are chosen for even air flow and low noise.

  3. Install unit and ducts

    The unit is hung with access for servicing; ductwork and grilles are fitted.

  4. Balance and commission

    Air flows are measured and balanced, then the system is commissioned.

Local points to consider

Return air

Every ducted unit needs a return air path; we design it rather than rely on gaps under doors.

Working hours

Most Whitstable businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Access

Filters and the unit need access for servicing — an access panel is non-negotiable.

Leased premises

If your Whitstable premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

Premises we work in around Whitstable

Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.

Your questions answered

How much does ducted air conditioning cost in Whitstable?

Guide prices in Whitstable run from about £3,950 to £9,150 per ducted zone, plus VAT. A typical job (reception or boardroom with one ducted zone) costs £4,550–£9,150 plus VAT. We fix the price in writing after a free survey.

Do you also cover Herne Bay, Canterbury and Faversham?

Yes. Alongside Whitstable, we also cover Herne Bay, Canterbury and Faversham. Each has its own page with local guide prices.

Which postcodes do you cover in Whitstable?

All of them, including CT5. Give us your postcode when you enquire and we will confirm the visit details.

Can one ducted unit serve several rooms?

It can, but every room then shares one thermostat. Rooms with different uses are better on separate units or zones.

How much ceiling void is needed?

Low-profile units can work in around 250–300 mm, but the duct route often needs more. We measure at survey.

Talk to us about your premises in Whitstable

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote