0800 088 6248
Engineer fitting a concealed ducted air conditioning unit above an open ceiling with slot diffusers

Ducted air conditioning in Yate

From a single room to a whole floor: ducted air conditioning in Yate, planned around your trading hours.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does ducted air conditioning cost in Yate?

In Yate, guide prices run from about £3,595 to £8,250 per ducted zone, plus VAT. A typical job (reception or boardroom with one ducted zone) usually comes to £4,095–£8,250 plus VAT. The fixed price follows a free survey.

Ducted air conditioning uses an indoor unit hidden in the ceiling void or a plant space, connected by ductwork to grilles or slot diffusers in the room.

Working in Yate

In a town like Yate, a single wall unit for a shop or a cassette for a surgery makes a real difference in summer. Bristol is about 15 km away.

We work across Yate's postcode districts, including BS37. We also cover Keynsham, Bath and Chippenham, all within easy reach of Yate. In Yate we work with offices, shops and hospitality premises, from a single room to a whole floor; each job starts with a heat load check rather than a guess from the floor area.

What is included

  • Survey of void depth and duct routes
  • Ducted unit selection by capacity and external static pressure
  • Supply and return ductwork, plenums and grilles
  • Access panel for servicing
  • Air-flow balancing and commissioning

Guide prices in Yate

Prices below include our regional adjustment for the South West (4% above the UK guide).

Ducted AC guide prices, Yate
ItemGuide price (ex VAT)Inc VATBasis
Low-profile ducted unit (up to about 7 kW)£3,595–£6,195£4,314–£7,434per zone
Medium static ducted unit (7–14 kW)£5,150–£8,250£6,180–£9,900per zone
Linear slot diffuser£145–£410£174–£492per metre
Access panel and ceiling making good£145–£515£174–£618per unit

Ex VAT, supply and install including standard ductwork.

How a job in Yate works

  1. Survey and route

    We check void depths and plan routes for supply and return ductwork.

  2. Design the air side

    Grille sizes and positions are chosen for even air flow and low noise.

  3. Install unit and ducts

    The unit is hung with access for servicing; ductwork and grilles are fitted. In Yate we agree timings around your opening hours.

  4. Balance and commission

    Air flows are measured and balanced, then the system is commissioned.

What to think about in Yate

Return air

Every ducted unit needs a return air path; we design it rather than rely on gaps under doors.

Leased premises

If your Yate premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

Access

Filters and the unit need access for servicing — an access panel is non-negotiable.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Types of premises we cover in Yate

Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.

FAQs for Yate

How much does ducted air conditioning cost in Yate?

Guide prices in Yate run from about £3,595 to £8,250 per ducted zone, plus VAT. A typical job (reception or boardroom with one ducted zone) costs £4,095–£8,250 plus VAT. We fix the price in writing after a free survey.

Do you also cover Keynsham, Bath and Chippenham?

Yes. Alongside Yate, we also cover Keynsham, Bath and Chippenham. Each has its own page with local guide prices.

Which postcodes do you cover in Yate?

All of them, including BS37. Give us your postcode when you enquire and we will confirm the visit details.

Can ducted units bring in fresh air?

Some ducted units can accept a fresh-air connection; in other cases ventilation is provided separately.

How much ceiling void is needed?

Low-profile units can work in around 250–300 mm, but the duct route often needs more. We measure at survey.

Get a guide price for Yate

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote