0800 088 6248
Electronic leak detector probe held against brazed copper pipe joints

F-gas leak checks and records in Haywards Heath

F-gas leak checks for premises in Haywards Heath, with records you can show an inspector or insurer.

  • Price confirmed before booking
  • Every system listed and checked
  • Records you can show an inspector

How much do F-gas leak checks cost in Haywards Heath?

Expect £165–£280 per visit, first system ex VAT in Haywards Heath; a typical job — leak checks on 3–6 systems in one visit — usually comes to £315–£995 plus VAT. The price is confirmed before booking.

An F-gas leak check is a legally required inspection of air conditioning and refrigeration equipment containing fluorinated gases at or above 5 tonnes CO2 equivalent.

Working in Haywards Heath

In Haywards Heath, typical premises are high-street shops, offices above them, surgeries, salons and local industrial units. Crawley is about 14 km away.

That includes premises in RH16 and the surrounding districts. We also work in nearby Burgess Hill, Crawley and Uckfield. Compliance visits in Haywards Heath are booked around your opening hours and the paperwork is kept for you afterwards.

What we do

  • Refrigerant type, charge and CO2e calculation for each system
  • Leak check by an F-gas certified engineer
  • Labels and records updated
  • Leak repair quote if a leak is found
  • Follow-up check within one month of any repair

Prices in Haywards Heath

Prices below include our regional adjustment for the South East (15% above the UK guide).

F-gas leak checks guide prices, Haywards Heath
ItemGuide price (ex VAT)Inc VATBasis
Leak check, first system (includes attendance)£165–£280£198–£336per visit
Each additional system, same visit£75–£145£90–£174per system
F-gas asset register set-upUp to £455Up to £546per site
Automatic leak detection system£915–£3,395£1,098–£4,074per system

Ex VAT. Leak checks are often combined with a service visit at no extra attendance charge.

How a visit in Haywards Heath works

  1. Asset check

    We record each system's refrigerant type and charge and calculate its CO2e.

  2. Set the frequency

    Each system gets the legal interval for its CO2e and any automatic leak detection.

  3. Check

    The engineer checks joints, valves, components and operating data for signs of leakage.

  4. Record

    Results are recorded and kept on your F-gas log for at least five years.

Points to plan for in Haywards Heath

Certified engineers

Leak checks must be done by an engineer holding the right F-gas certification.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Repairs

If a leak is found it must be repaired without undue delay and re-checked within one month.

Access and parking

Town-centre jobs in Haywards Heath often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.

Types of premises we cover in Haywards Heath

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Questions about F-gas leak checks in Haywards Heath

How much do F-gas leak checks cost in Haywards Heath?

In Haywards Heath, guide prices are around £165–£280 per visit, first system, plus VAT; a typical job (leak checks on 3–6 systems in one visit) is £315–£995 plus VAT.

Do you also cover Burgess Hill, Crawley and Uckfield?

Yes. Alongside Haywards Heath, we also cover Burgess Hill, Crawley and Uckfield. Each has its own page with local guide prices.

Which postcodes do you cover in Haywards Heath?

All of them, including RH16. Give us your postcode when you enquire and we will confirm the visit details.

How often are leak checks needed?

At least every 12 months from 5 tonnes CO2e, every 6 months from 50 tonnes, and every 3 months from 500 tonnes. Where automatic leak detection is fitted, each interval doubles to 24, 12 and 6 months.

Which systems need F-gas leak checks?

In Great Britain, equipment containing F-gas at or above 5 tonnes CO2 equivalent (with exemptions for some hermetically sealed equipment below 10 tonnes). Many VRF and larger split systems qualify.

Talk to us about your premises in Haywards Heath

The visit price is agreed before we book. We reply with a guide price or available dates.

CallGet a quote