Server room and comms room cooling in Mitcham
A free survey, a clear specification and a fixed price for server room cooling in Mitcham.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does server room cooling cost in Mitcham?
In Mitcham, guide prices run from about £5,050 to £19,150 per room (duty/standby pair), plus VAT. A typical job (small comms room, 2–5 kW IT load, N+1 pair) usually comes to £5,050–£11,450 plus VAT. The fixed price follows a free survey.
Server room cooling is dedicated air conditioning that removes the heat produced by IT equipment around the clock, independently of the office system.
Our coverage in Mitcham
Mitcham sits within London's dense commercial fabric: shopfronts, offices above, studios and venues, where outdoor unit positions and access need careful planning.
We work across Mitcham's postcode districts, including CR4. Neighbouring towns we cover include Morden, Wimbledon and Streatham. Server room cooling in Mitcham is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.
What we do
- IT load assessment (kW) and room survey
- Low-ambient kits so cooling works in winter
- Rotation and changeover controller
- High-temperature alarm or BMS / email alert
- Commissioning and maintenance plan
Local guide prices for Mitcham
Prices below include our regional adjustment for London (28% above the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single dedicated unit (no back-up) | £2,500–£5,050 | £3,000–£6,060 | per room |
| Duty/standby pair with changeover controller | £5,050–£11,450 | £6,060–£13,740 | per room |
| Low-ambient kit (winter operation) | £245–£635 | £294–£762 | per unit |
| Temperature alarm with remote alert | £315–£890 | £378–£1,068 | per room |
| Close control unit | £12,750–£37,995 | £15,300–£45,594 | per unit |
Ex VAT, supply and install.
The steps for a project in Mitcham
Measure the load
We read the IT and UPS load and allow for growth. For sites in Mitcham we confirm access and parking beforehand.
Design resilience
Duty/standby units, changeover control and power supplies are designed together.
Install with minimal risk
Work around live equipment is planned with your IT team and kept clean.
Test failover
We test the changeover and alarms before handover.
Local points to consider
Winter operation
Cooling is needed even when it is cold outside, so low-ambient controls are fitted.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Resilience
A single unit is a single point of failure. N+1 means one unit can fail without the room overheating.
Conservation areas
Historic streets and listed buildings in and around Mitcham are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.
Typical premises in Mitcham
- Schools and education: classroom cooling, ventilation and IT room cooling, installed in the holidays.
- Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Questions about server room cooling in Mitcham
How much does server room cooling cost in Mitcham?
Guide prices in Mitcham run from about £5,050 to £19,150 per room (duty/standby pair), plus VAT. A typical job (small comms room, 2–5 kW IT load, N+1 pair) costs £5,050–£11,450 plus VAT. We fix the price in writing after a free survey.
Do you also cover Morden, Wimbledon and Streatham?
Yes. Alongside Mitcham, we also cover Morden, Wimbledon and Streatham. Each has its own page with local guide prices.
Which postcodes do you cover in Mitcham?
All of them, including CR4. Give us your postcode when you enquire and we will confirm the visit details.
What temperature should a server room be?
ASHRAE guidance recommends equipment inlet air of about 18–27°C. Many small rooms are set at around 21–24°C to leave headroom if a unit fails.
Can we get alerts if the temperature rises?
Yes. We can fit a temperature alarm that sends alerts by email or text, or connects to your BMS or network monitoring.
Need server room cooling in Mitcham?
Free survey and fixed written quote. We reply with a guide price or to book the survey.