Split and multi-split systems in Acton
Split and multi-split air conditioning in Acton, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a split air conditioning system cost in Acton?
In Acton, guide prices run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) usually comes to £4,395–£7,595 plus VAT. The fixed price follows a free survey.
A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.
Our coverage in Acton
Acton sits within London's dense commercial fabric: shopfronts, offices above, studios and venues, where outdoor unit positions and access need careful planning.
We work across Acton's postcode districts, including CO10, CW5, DY13, SY9 and W3. Neighbouring towns we cover include Chiswick, Shepherds Bush and Willesden. Split and multi-split air conditioning in Acton is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.
Included as standard
- Wall-mounted, floor-standing or under-ceiling indoor units
- Outdoor unit on wall brackets, a flat roof frame or ground mounts
- Pipework in neat trunking or concealed routes
- Condensate drainage
- Commissioning, remote or wired controls and F-gas records
Prices in Acton
Prices below include our regional adjustment for London (28% above the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single split 2.5–3.5 kW | £1,850–£3,150 | £2,220–£3,780 | per system |
| Single split 5–7 kW | £2,500–£3,795 | £3,000–£4,554 | per system |
| Multi-split, 2 indoor units | £4,395–£7,595 | £5,274–£9,114 | per system |
| Multi-split, 3–4 indoor units | £6,350–£12,750 | £7,620–£15,300 | per system |
| Extra pipework beyond 5 m | £45–£85 | £54–£102 | per metre |
Ex VAT, supply and install with standard access.
The steps for a project in Acton
Survey
We size the unit to the room and agree indoor and outdoor positions and the pipe route. For sites in Acton we confirm access and parking beforehand.
Mount the units
Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.
Pipe and wire
Pipework, interconnecting cable and condensate are run and made off neatly.
Test and commission
Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.
Points to plan for in Acton
Outdoor unit position
Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Pipe routes
Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.
Access and parking
Town-centre jobs in Acton often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Typical premises in Acton
- Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
- Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
- Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
- Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
Common questions from businesses in Acton
How much does a split air conditioning system cost in Acton?
Guide prices in Acton run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) costs £4,395–£7,595 plus VAT. We fix the price in writing after a free survey.
Do you also cover Chiswick, Shepherds Bush and Willesden?
Yes. Alongside Acton, we also cover Chiswick, Shepherds Bush and Willesden. Each has its own page with local guide prices.
Which postcodes do you cover in Acton?
All of them, including CO10, CW5, DY13 and SY9. Give us your postcode when you enquire and we will confirm the visit details.
How long does it take to fit?
A single split is usually fitted in a day; a multi-split in one to two days.
Single split or multi-split?
Separate singles are more resilient and can be cheaper for two rooms; a multi-split saves outdoor space. We price both where it is close.
Need split and multi-split air conditioning in Acton?
Free survey and fixed written quote. We reply with a guide price or to book the survey.