0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Barnet

Split and multi-split air conditioning in Barnet, sized to the real heat load of your premises rather than guessed from the floor area.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Barnet?

Our guide range in Barnet is £1,850–£3,795 per system before VAT; a typical job (two-room multi-split) is £4,395–£7,595 plus VAT. Your exact price is fixed in writing once we have surveyed.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Covering Barnet and nearby

Premises in Barnet are often in mixed-use buildings with shared roofs and tight access, so outdoor unit positions are agreed early.

We work across Barnet's postcode districts, including EN5. Nearby, we also cover East Barnet (about 3 km), Potters Bar (about 5 km) and Borehamwood (about 5 km). For split and multi-split air conditioning in Barnet, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.

What we do

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Pipework in neat trunking or concealed routes
  • Condensate drainage

Prices in Barnet

Prices below include our regional adjustment for London (28% above the UK guide).

Split systems guide prices, Barnet
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,850–£3,150£2,220–£3,780per system
Single split 5–7 kW£2,500–£3,795£3,000–£4,554per system
Multi-split, 2 indoor units£4,395–£7,595£5,274–£9,114per system
Multi-split, 3–4 indoor units£6,350–£12,750£7,620–£15,300per system
Extra pipework beyond 5 m£45–£85£54–£102per metre

Ex VAT, supply and install with standard access.

The steps for a project in Barnet

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly. In Barnet we agree timings around your opening hours.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Before you book in Barnet

Outdoor unit position

Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.

Shared buildings

In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.

One outdoor unit, many rooms

Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.

Conservation areas

Historic streets and listed buildings in and around Barnet are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Premises we work in around Barnet

  • Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
  • Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
  • Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

FAQs for Barnet

How much does a split air conditioning system cost in Barnet?

Guide prices in Barnet run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) costs £4,395–£7,595 plus VAT. We fix the price in writing after a free survey.

Do you also cover East Barnet, Potters Bar and Borehamwood?

Yes. Alongside Barnet, we also cover East Barnet, Potters Bar and Borehamwood. Each has its own page with local guide prices.

Which postcodes do you cover in Barnet?

All of them, including EN5. Give us your postcode when you enquire and we will confirm the visit details.

How much does a split air conditioning system cost for a business?

A single wall-mounted split typically costs £1,450–£2,950 plus VAT installed. Multi-splits with two to four indoor units are typically £3,450–£9,950 plus VAT.

Can a split system heat in winter?

Yes. Modern split systems are heat pumps and can heat efficiently down to well below freezing.

Get a guide price for Barnet

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote