0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Potters Bar

Cooling and heating for offices, shops and hospitality venues in Potters Bar, with a free site survey and a fixed written quote.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Potters Bar?

Budget roughly £1,550–£3,195 per system ex VAT in Potters Bar. For a typical job — two-room multi-split — expect £3,750–£6,450 plus VAT. You get a fixed written quote after the free survey.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Our coverage in Potters Bar

Most commercial premises in and around Potters Bar are shops, offices, salons, pubs and small industrial units. Watford is about 16 km away.

We cover every Potters Bar postcode, including EN6. Nearby, we also cover Barnet (about 5 km), East Barnet (about 5 km) and Enfield (about 8 km). Split and multi-split air conditioning in Potters Bar is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.

What you get

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Pipework in neat trunking or concealed routes
  • Commissioning, remote or wired controls and F-gas records

Guide prices in Potters Bar

These guide prices are adjusted for the East of England, where labour and access costs run about 8% above the UK guide.

Split systems guide prices, Potters Bar
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,550–£2,650£1,860–£3,180per system
Single split 5–7 kW£2,095–£3,195£2,514–£3,834per system
Multi-split, 2 indoor units£3,750–£6,450£4,500–£7,740per system
Multi-split, 3–4 indoor units£5,350–£10,750£6,420–£12,900per system
Extra pipework beyond 5 m£40–£70£48–£84per metre

Ex VAT, supply and install with standard access.

The steps for a project in Potters Bar

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly. In Potters Bar we agree timings around your opening hours.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Points to plan for in Potters Bar

Refrigerant rules

Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Outdoor unit position

Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.

Shared buildings

In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.

Typical premises in Potters Bar

  • Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
  • Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Your questions answered

How much does a split air conditioning system cost in Potters Bar?

Guide prices in Potters Bar run from about £1,550 to £3,195 per system, plus VAT. A typical job (two-room multi-split) costs £3,750–£6,450 plus VAT. We fix the price in writing after a free survey.

Do you also cover Barnet, East Barnet and Enfield?

Yes. Alongside Potters Bar, we also cover Barnet, East Barnet and Enfield. Each has its own page with local guide prices.

Which postcodes do you cover in Potters Bar?

All of them, including EN6. Give us your postcode when you enquire and we will confirm the visit details.

Single split or multi-split?

Separate singles are more resilient and can be cheaper for two rooms; a multi-split saves outdoor space. We price both where it is close.

How long does it take to fit?

A single split is usually fitted in a day; a multi-split in one to two days.

Talk to us about your premises in Potters Bar

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote