Split and multi-split systems in Battersea
A free survey, a clear specification and a fixed price for split and multi-split air conditioning in Battersea.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a split air conditioning system cost in Battersea?
Our guide range in Battersea is £1,850–£3,795 per system before VAT; a typical job (two-room multi-split) is £4,395–£7,595 plus VAT. Your exact price is fixed in writing once we have surveyed.
A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.
Working in Battersea
In Battersea, commercial premises range from street-level shops and restaurants to offices in converted and modern buildings, many with managing agents and landlord consents to work through.
We work across Battersea's postcode districts, including SW11. Nearby, we also cover Chelsea (about 2 km), Pimlico (about 2 km) and Fulham (about 3 km). In Battersea, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.
What you get
- Wall-mounted, floor-standing or under-ceiling indoor units
- Outdoor unit on wall brackets, a flat roof frame or ground mounts
- Pipework in neat trunking or concealed routes
- Condensate drainage
- Commissioning, remote or wired controls and F-gas records
Guide prices in Battersea
Prices below include our regional adjustment for London (28% above the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single split 2.5–3.5 kW | £1,850–£3,150 | £2,220–£3,780 | per system |
| Single split 5–7 kW | £2,500–£3,795 | £3,000–£4,554 | per system |
| Multi-split, 2 indoor units | £4,395–£7,595 | £5,274–£9,114 | per system |
| Multi-split, 3–4 indoor units | £6,350–£12,750 | £7,620–£15,300 | per system |
| Extra pipework beyond 5 m | £45–£85 | £54–£102 | per metre |
Ex VAT, supply and install with standard access.
How a job in Battersea works
Survey
We size the unit to the room and agree indoor and outdoor positions and the pipe route.
Mount the units
Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.
Pipe and wire
Pipework, interconnecting cable and condensate are run and made off neatly. We keep work areas in Battersea screened and tidy at the end of each day.
Test and commission
Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.
Before you book in Battersea
Refrigerant rules
Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
One outdoor unit, many rooms
Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.
Roof and height work
Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.
Types of premises we cover in Battersea
- Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
- Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
- Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
- Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
Common questions from businesses in Battersea
How much does a split air conditioning system cost in Battersea?
Guide prices in Battersea run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) costs £4,395–£7,595 plus VAT. We fix the price in writing after a free survey.
Do you also cover Chelsea, Pimlico and Fulham?
Yes. Alongside Battersea, we also cover Chelsea, Pimlico and Fulham. Each has its own page with local guide prices.
Which postcodes do you cover in Battersea?
All of them, including SW11. Give us your postcode when you enquire and we will confirm the visit details.
Single split or multi-split?
Separate singles are more resilient and can be cheaper for two rooms; a multi-split saves outdoor space. We price both where it is close.
How long does it take to fit?
A single split is usually fitted in a day; a multi-split in one to two days.
Talk to us about your premises in Battersea
Free survey and fixed written quote. We reply with a guide price or to book the survey.