Split and multi-split systems in Brixton
Split and multi-split air conditioning in Brixton, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a split air conditioning system cost in Brixton?
In Brixton, guide prices run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) usually comes to £4,395–£7,595 plus VAT. Your exact price is fixed in writing once we have surveyed.
A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.
Brixton and surrounding areas
Brixton sits within London's dense commercial fabric: shopfronts, offices above, studios and venues, where outdoor unit positions and access need careful planning.
We work across Brixton's postcode districts, including PL8 and SW2. We also cover Peckham, Pimlico and Battersea, all within easy reach of Brixton. Buildings across London range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
What is included
- Survey and unit sizing
- Wall-mounted, floor-standing or under-ceiling indoor units
- Outdoor unit on wall brackets, a flat roof frame or ground mounts
- Pipework in neat trunking or concealed routes
- Commissioning, remote or wired controls and F-gas records
Split systems prices in Brixton
These guide prices are adjusted for London, where labour and access costs run about 28% above the UK guide.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single split 2.5–3.5 kW | £1,850–£3,150 | £2,220–£3,780 | per system |
| Single split 5–7 kW | £2,500–£3,795 | £3,000–£4,554 | per system |
| Multi-split, 2 indoor units | £4,395–£7,595 | £5,274–£9,114 | per system |
| Multi-split, 3–4 indoor units | £6,350–£12,750 | £7,620–£15,300 | per system |
| Extra pipework beyond 5 m | £45–£85 | £54–£102 | per metre |
Ex VAT, supply and install with standard access.
How we work in Brixton
Survey
We size the unit to the room and agree indoor and outdoor positions and the pipe route. For sites in Brixton we confirm access and parking beforehand.
Mount the units
Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.
Pipe and wire
Pipework, interconnecting cable and condensate are run and made off neatly.
Test and commission
Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.
Points to plan for in Brixton
Outdoor unit position
Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.
Roof and height work
Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.
One outdoor unit, many rooms
Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.
Access and parking
Town-centre jobs in Brixton often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Who we work with in Brixton
- Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
- Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
- Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
- Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Common questions from businesses in Brixton
How much does a split air conditioning system cost in Brixton?
Guide prices in Brixton run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) costs £4,395–£7,595 plus VAT. We fix the price in writing after a free survey.
Do you also cover Peckham, Pimlico and Battersea?
Yes. Alongside Brixton, we also cover Peckham, Pimlico and Battersea. Each has its own page with local guide prices.
Which postcodes do you cover in Brixton?
All of them, including PL8 and SW2. Give us your postcode when you enquire and we will confirm the visit details.
Single split or multi-split?
Separate singles are more resilient and can be cheaper for two rooms; a multi-split saves outdoor space. We price both where it is close.
How long does it take to fit?
A single split is usually fitted in a day; a multi-split in one to two days.
Need split and multi-split air conditioning in Brixton?
Free survey and fixed written quote. We reply with a guide price or to book the survey.