Split and multi-split systems in Bearsden
Cooling and heating for offices, shops and hospitality venues in Bearsden, with a free site survey and a fixed written quote.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a split air conditioning system cost in Bearsden?
Budget roughly £1,395–£2,850 per system ex VAT in Bearsden. For a typical job — two-room multi-split — expect £3,295–£5,695 plus VAT. You get a fixed written quote after the free survey.
A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.
Bearsden and surrounding areas
In Bearsden, typical premises are high-street shops, offices above them, surgeries, salons and local industrial units. Glasgow is about 8 km away.
Postcode districts we cover in Bearsden include G61. Neighbouring towns we cover include Clydebank, Renfrew and Bishopbriggs. We plan installations in Bearsden so the noisy work — core drilling, ceiling access, lifting plant — happens when it disturbs your business least.
What you get
- Survey and unit sizing
- Wall-mounted, floor-standing or under-ceiling indoor units
- Pipework in neat trunking or concealed routes
- Condensate drainage
- Commissioning, remote or wired controls and F-gas records
Guide prices in Bearsden
Prices below include our regional adjustment for Scotland (4% below the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Single split 2.5–3.5 kW | £1,395–£2,350 | £1,674–£2,820 | per system |
| Single split 5–7 kW | £1,850–£2,850 | £2,220–£3,420 | per system |
| Multi-split, 2 indoor units | £3,295–£5,695 | £3,954–£6,834 | per system |
| Multi-split, 3–4 indoor units | £4,750–£9,550 | £5,700–£11,460 | per system |
| Extra pipework beyond 5 m | £35–£60 | £42–£72 | per metre |
Ex VAT, supply and install with standard access.
The steps for a project in Bearsden
Survey
We size the unit to the room and agree indoor and outdoor positions and the pipe route.
Mount the units
Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.
Pipe and wire
Pipework, interconnecting cable and condensate are run and made off neatly. We keep work areas in Bearsden screened and tidy at the end of each day.
Test and commission
Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.
Before you book in Bearsden
Refrigerant rules
Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Outdoor unit position
Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.
Leased premises
If your Bearsden premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Types of premises we cover in Bearsden
- Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
- Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
- Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
- Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
Compliance in Scotland: refrigerant work falls under GB F-gas rules, and systems with an effective output of 12 kW or more need a periodic energy inspection (often called TM44).
FAQs for Bearsden
How much does a split air conditioning system cost in Bearsden?
Guide prices in Bearsden run from about £1,395 to £2,850 per system, plus VAT. A typical job (two-room multi-split) costs £3,295–£5,695 plus VAT. We fix the price in writing after a free survey.
Do you also cover Clydebank, Renfrew and Bishopbriggs?
Yes. Alongside Bearsden, we also cover Clydebank, Renfrew and Bishopbriggs. Each has its own page with local guide prices.
Which postcodes do you cover in Bearsden?
All of them, including G61. Give us your postcode when you enquire and we will confirm the visit details.
Does a small split need F-gas leak checks?
It depends on the refrigerant charge and type. Many small R32 splits fall below the 5 tonnes CO2 equivalent threshold for mandatory leak checks, but they still need installing and servicing by F-gas certified engineers.
How long does it take to fit?
A single split is usually fitted in a day; a multi-split in one to two days.
Talk to us about your premises in Bearsden
Free survey and fixed written quote. We reply with a guide price or to book the survey.