0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Dundee and Angus

Split and multi-split air conditioning in Dundee and Angus, sized to the real heat load of your premises rather than guessed from the floor area.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Dundee and Angus?

Budget roughly £1,395–£2,850 per system ex VAT in Dundee and Angus. For a typical job — two-room multi-split — expect £3,295–£5,695 plus VAT. Your exact price is fixed in writing once we have surveyed.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Working in Dundee and Angus

We cover all of Dundee and Angus, including Dundee, Arbroath, Forfar and Montrose. Each town below has its own page with local guide prices.

Postcode districts we cover include AB30, DD1, DD3, DD5, DD7, DD9, DD11 and PH12. Buildings across Dundee and Angus range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

What we do

  • Survey and unit sizing
  • Wall-mounted, floor-standing or under-ceiling indoor units
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Condensate drainage
  • Commissioning, remote or wired controls and F-gas records

Split systems prices in Dundee and Angus

Prices below include our regional adjustment for Scotland (4% below the UK guide).

Split systems guide prices, Dundee and Angus
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,395–£2,350£1,674–£2,820per system
Single split 5–7 kW£1,850–£2,850£2,220–£3,420per system
Multi-split, 2 indoor units£3,295–£5,695£3,954–£6,834per system
Multi-split, 3–4 indoor units£4,750–£9,550£5,700–£11,460per system
Extra pipework beyond 5 m£35–£60£42–£72per metre

Ex VAT, supply and install with standard access.

How it works in Dundee and Angus

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route. For sites in Dundee and Angus we confirm access and parking beforehand.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Local points to consider

Outdoor unit position

Outdoor units need air flow and access, and should be away from neighbours' windows to keep noise down.

Working hours

Most Dundee and Angus businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Refrigerant rules

Since 1 January 2025, new single split systems holding under 3 kg of refrigerant in Great Britain cannot use refrigerant with a GWP of 750 or more — in practice, R32 or lower.

Access and parking

Town-centre jobs in Dundee and Angus often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.

Typical premises in Dundee and Angus

  • Healthcare and dental: clean, quiet cooling for surgeries, clinics, dental practices and care settings.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.
  • Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.

In Scotland, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; systems with an effective output of 12 kW or more also need a periodic energy inspection.

Questions about split systems in Dundee and Angus

How much does a split air conditioning system cost in Dundee and Angus?

Guide prices in Dundee and Angus run from about £1,395 to £2,850 per system, plus VAT. A typical job (two-room multi-split) costs £3,295–£5,695 plus VAT. We fix the price in writing after a free survey.

Do you also cover Fife, Perth and Kinross and Edinburgh?

Yes. Alongside Dundee and Angus, we also cover Fife, Perth and Kinross and Edinburgh. Each has its own page with local guide prices.

Can a split system heat in winter?

Yes. Modern split systems are heat pumps and can heat efficiently down to well below freezing.

How long does it take to fit?

A single split is usually fitted in a day; a multi-split in one to two days.

Get a guide price for Dundee and Angus

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote