0800 088 6248
Wall-mounted split air conditioning unit above a reception desk

Split and multi-split systems in Thamesmead

From a single room to a whole floor: split and multi-split air conditioning in Thamesmead, planned around your trading hours.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a split air conditioning system cost in Thamesmead?

Our guide range in Thamesmead is £1,850–£3,795 per system before VAT; a typical job (two-room multi-split) is £4,395–£7,595 plus VAT. The fixed price follows a free survey.

A split air conditioning system has an indoor unit and an outdoor unit joined by refrigerant pipework.

Thamesmead and surrounding areas

Thamesmead sits within London's dense commercial fabric: shopfronts, offices above, studios and venues, where outdoor unit positions and access need careful planning.

Postcode districts we cover in Thamesmead include SE2 and SE28. Neighbouring towns we cover include Barking, Welling and Dagenham. In Thamesmead, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.

Included as standard

  • Survey and unit sizing
  • Outdoor unit on wall brackets, a flat roof frame or ground mounts
  • Pipework in neat trunking or concealed routes
  • Condensate drainage
  • Commissioning, remote or wired controls and F-gas records

Local guide prices for Thamesmead

Prices below include our regional adjustment for London (28% above the UK guide).

Split systems guide prices, Thamesmead
ItemGuide price (ex VAT)Inc VATBasis
Single split 2.5–3.5 kW£1,850–£3,150£2,220–£3,780per system
Single split 5–7 kW£2,500–£3,795£3,000–£4,554per system
Multi-split, 2 indoor units£4,395–£7,595£5,274–£9,114per system
Multi-split, 3–4 indoor units£6,350–£12,750£7,620–£15,300per system
Extra pipework beyond 5 m£45–£85£54–£102per metre

Ex VAT, supply and install with standard access.

The steps for a project in Thamesmead

  1. Survey

    We size the unit to the room and agree indoor and outdoor positions and the pipe route. For sites in Thamesmead we confirm access and parking beforehand.

  2. Mount the units

    Indoor unit on a mounting plate, outdoor unit on brackets or a frame with anti-vibration mounts.

  3. Pipe and wire

    Pipework, interconnecting cable and condensate are run and made off neatly.

  4. Test and commission

    Pressure test, evacuation, any extra refrigerant charge, then commissioning and handover.

Local points to consider

Pipe routes

Shorter, simpler pipe routes are cheaper and more reliable. We plan routes before quoting.

Access and parking

Town-centre jobs in Thamesmead often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.

One outdoor unit, many rooms

Multi-splits save wall space but share a single compressor. For server rooms or critical spaces we recommend dedicated systems.

Leased premises

If your Thamesmead premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

Who we work with in Thamesmead

  • Pubs and bars: cooling for busy bars, function rooms and cellars, sited with neighbours in mind.
  • Warehouses and industrial: cooling for offices, mezzanines, control rooms and temperature-sensitive areas.
  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Questions about split systems in Thamesmead

How much does a split air conditioning system cost in Thamesmead?

Guide prices in Thamesmead run from about £1,850 to £3,795 per system, plus VAT. A typical job (two-room multi-split) costs £4,395–£7,595 plus VAT. We fix the price in writing after a free survey.

Do you also cover Barking, Welling and Dagenham?

Yes. Alongside Thamesmead, we also cover Barking, Welling and Dagenham. Each has its own page with local guide prices.

Which postcodes do you cover in Thamesmead?

All of them, including SE2 and SE28. Give us your postcode when you enquire and we will confirm the visit details.

How long does it take to fit?

A single split is usually fitted in a day; a multi-split in one to two days.

How much does a split air conditioning system cost for a business?

A single wall-mounted split typically costs £1,450–£2,950 plus VAT installed. Multi-splits with two to four indoor units are typically £3,450–£9,950 plus VAT.

Need split and multi-split air conditioning in Thamesmead?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote