0800 088 6248
Assessor with a clipboard looking at an air conditioning control panel in a plant room

TM44 air conditioning inspections in Acton

Get your air conditioning in Acton on the right side of the rules with TM44 air conditioning inspections.

  • Price confirmed before booking
  • Every system listed and checked
  • Records you can show an inspector

How much does a TM44 inspection cost in Acton?

Expect £505–£3,795 per building ex VAT in Acton; a typical job — office or shop with 15–50 kW of air conditioning — usually comes to £505–£995 plus VAT. We confirm the price once we know how many systems you have.

A TM44 inspection is the air conditioning energy assessment required for systems with a combined effective rated output above 12 kW.

Acton and surrounding areas

In Acton, commercial premises range from street-level shops and restaurants to offices in converted and modern buildings, many with managing agents and landlord consents to work through.

We cover every Acton postcode, including CO10, CW5, DY13, SY9 and W3. We also cover Chiswick, Shepherds Bush and Willesden, all within easy reach of Acton. We give you the records in a form an inspector, insurer or landlord can read, and remind you when the next check is due.

What is included

  • Check of whether your systems meet the 12 kW threshold for your nation
  • Collection of system details, records and drawings
  • Report with recommendations, lodged where the rules require
  • Quote for any recommended improvements
  • Reminder before the next inspection is due

Prices in Acton

Prices below include our regional adjustment for London (28% above the UK guide).

TM44 inspections guide prices, Acton
ItemGuide price (ex VAT)Inc VATBasis
Small building, up to about 50 kW£505–£995£606–£1,194per inspection
Medium building, 50–250 kW£890–£1,850£1,068–£2,220per inspection
Large or complex building£1,595–£3,795£1,914–£4,554per inspection

Ex VAT. Final price depends on the number and type of systems and site access.

How we handle TM44 inspections in Acton

  1. Check the threshold

    We work out the effective rated output of the systems you control and whether they count together under the rules for your nation.

  2. Prepare

    Make, model, capacity, refrigerant and maintenance records are gathered for the assessor.

  3. Inspect

    The accredited assessor inspects the systems and controls on site.

  4. Act on the report

    You receive the report; we can quote for the recommended improvements.

What to think about in Acton

England and Wales

Under the Energy Performance of Buildings (England and Wales) Regulations 2012, systems over 12 kW need inspecting at least every five years by an accredited assessor, with the report lodged on the national register. Local Trading Standards enforce it, with a £300 penalty for not having a valid report.

Working hours

Most Acton businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Not an F-gas check

A TM44 inspection is about energy efficiency. It does not replace F-gas leak checks or servicing.

Conservation areas

Historic streets and listed buildings in and around Acton are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Premises we work in around Acton

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

FAQs for Acton

How much does a TM44 inspection cost in Acton?

In Acton, guide prices are around £505–£3,795 per building, plus VAT; a typical job (office or shop with 15–50 kW of air conditioning) is £505–£995 plus VAT.

Do you also cover Chiswick, Shepherds Bush and Willesden?

Yes. Alongside Acton, we also cover Chiswick, Shepherds Bush and Willesden. Each has its own page with local guide prices.

Which postcodes do you cover in Acton?

All of them, including CO10, CW5, DY13 and SY9. Give us your postcode when you enquire and we will confirm the visit details.

What is the penalty for not having one?

In England and Wales a £300 penalty can be issued for failing to have a valid report, enforced by local Trading Standards. Northern Ireland also sets a £300 penalty.

Does a TM44 include a leak check?

No. F-gas leak checks are a separate legal requirement, usually done during servicing.

Get a guide price for Acton

The visit price is agreed before we book. We reply with a guide price or available dates.

CallGet a quote