VRF and VRV systems in Ashford, Kent
Cooling and heating for offices, shops and hospitality venues in Ashford, Kent, with a free site survey and a fixed written quote.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Ashford, Kent?
Our guide range in Ashford, Kent is £2,795–£5,695 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £27,995–£91,500 plus VAT. The fixed price follows a free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Covering Ashford, Kent and nearby
In Ashford, Kent, typical commercial premises include town-centre shops and offices, surgeries, gyms and units on business parks. Maidstone is about 28 km away.
We cover every Ashford, Kent postcode, including EX31, SP6, TN24, TQ7 and TW15. We also work in nearby Faversham, Canterbury and Folkestone. We plan installations in Ashford, Kent so the noisy work — core drilling, ceiling access, lifting plant — happens when it disturbs your business least.
What we do
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
VRF / VRV prices in Ashford, Kent
These guide prices are adjusted for the South East, where labour and access costs run about 15% above the UK guide.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,795–£5,095 | £3,354–£6,114 | per unit |
| Heat recovery VRF, per indoor unit | £3,395–£5,695 | £4,074–£6,834 | per unit |
| Central controller and BMS interface | £1,095–£4,550 | £1,314–£5,460 | per system |
| Refrigerant leak detection (per alarmed room) | £455–£1,050 | £546–£1,260 | per room |
| Crane lift for roof plant | £1,095–£3,395 | £1,314–£4,074 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
From enquiry to handover in Ashford, Kent
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Ashford, Kent we agree timings around your opening hours.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Before you book in Ashford, Kent
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Leased premises
If your Ashford, Kent premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Types of premises we cover in Ashford, Kent
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
FAQs for Ashford, Kent
How much does a VRF system cost in Ashford, Kent?
Guide prices in Ashford, Kent run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £27,995–£91,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Faversham, Canterbury and Folkestone?
Yes. Alongside Ashford, Kent, we also cover Faversham, Canterbury and Folkestone. Each has its own page with local guide prices.
Which postcodes do you cover in Ashford, Kent?
All of them, including EX31, SP6, TN24 and TQ7. Give us your postcode when you enquire and we will confirm the visit details.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
How long does a VRF system last?
With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.
Get a guide price for Ashford, Kent
Free survey and fixed written quote. We reply with a guide price or to book the survey.