VRF and VRV systems in Bedworth
A free survey, a clear specification and a fixed price for VRF and VRV air conditioning in Bedworth.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Bedworth?
In Bedworth, guide prices run from about £2,450 to £4,950 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £24,500–£79,500 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Bedworth and surrounding areas
Businesses in Bedworth range from independent shops and restaurants to offices, clinics and warehouses. Coventry is about 9 km away.
That includes premises in CV12 and the surrounding districts. Neighbouring towns we cover include Nuneaton, Coventry and Hinckley. In Bedworth we work with offices, shops and hospitality premises, from a single room to a whole floor; each job starts with a heat load check rather than a guess from the floor area.
What the job covers
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Prices in Bedworth
These guide prices are adjusted for the West Midlands, where labour and access costs run at about the UK guide level.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,450–£4,450 | £2,940–£5,340 | per unit |
| Heat recovery VRF, per indoor unit | £2,950–£4,950 | £3,540–£5,940 | per unit |
| Central controller and BMS interface | £945–£3,950 | £1,134–£4,740 | per system |
| Refrigerant leak detection (per alarmed room) | £395–£895 | £474–£1,074 | per room |
| Crane lift for roof plant | £945–£2,950 | £1,134–£3,540 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
The steps for a project in Bedworth
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Bedworth screened and tidy at the end of each day.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Local points to consider
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Access and parking
Town-centre jobs in Bedworth often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Premises we work in around Bedworth
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.
Your questions answered
How much does a VRF system cost in Bedworth?
Guide prices in Bedworth run from about £2,450 to £4,950 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £24,500–£79,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Nuneaton, Coventry and Hinckley?
Yes. Alongside Bedworth, we also cover Nuneaton, Coventry and Hinckley. Each has its own page with local guide prices.
Which postcodes do you cover in Bedworth?
All of them, including CV12. Give us your postcode when you enquire and we will confirm the visit details.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
How long does a VRF system last?
With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.
Talk to us about your premises in Bedworth
Free survey and fixed written quote. We reply with a guide price or to book the survey.