VRF and VRV systems in Birmingham
VRF and VRV air conditioning for businesses in Birmingham — surveyed, designed and priced in writing before any work starts.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Birmingham?
Budget roughly £2,450–£4,950 per indoor unit (whole system) ex VAT in Birmingham. For a typical job — office floor of 10–16 indoor units — expect £24,500–£79,500 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Where we work around Birmingham
Birmingham has the full mix of premises that need cooling and heating: offices, shops, restaurants, gyms, clinics and technical rooms.
Postcode districts we cover in Birmingham include B1, B2, B3, B4, B5 and B7. We also work in nearby Smethwick, West Bromwich and Shirley. For VRF and VRV air conditioning in Birmingham, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.
What you get
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
VRF / VRV prices in Birmingham
These guide prices are adjusted for the West Midlands, where labour and access costs run at about the UK guide level.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,450–£4,450 | £2,940–£5,340 | per unit |
| Heat recovery VRF, per indoor unit | £2,950–£4,950 | £3,540–£5,940 | per unit |
| Central controller and BMS interface | £945–£3,950 | £1,134–£4,740 | per system |
| Refrigerant leak detection (per alarmed room) | £395–£895 | £474–£1,074 | per room |
| Crane lift for roof plant | £945–£2,950 | £1,134–£3,540 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How it works in Birmingham
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Birmingham we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Local points to consider
Plant space
Outdoor units need clear air flow, structural support and safe access for servicing.
Access and parking
Town-centre jobs in Birmingham often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Leased premises
If your Birmingham premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Who we work with in Birmingham
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
Common questions from businesses in Birmingham
How much does a VRF system cost in Birmingham?
Guide prices in Birmingham run from about £2,450 to £4,950 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £24,500–£79,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Smethwick, West Bromwich and Shirley?
Yes. Alongside Birmingham, we also cover Smethwick, West Bromwich and Shirley. Each has its own page with local guide prices.
Which postcodes do you cover in Birmingham?
All of them, including B1, B2, B3 and B4. Give us your postcode when you enquire and we will confirm the visit details.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
What is heat recovery VRF?
A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.
Get a guide price for Birmingham
Free survey and fixed written quote. We reply with a guide price or to book the survey.