VRF and VRV systems in Consett
A free survey, a clear specification and a fixed price for VRF and VRV air conditioning in Consett.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Consett?
In Consett, guide prices run from about £2,295 to £4,650 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £22,995–£74,500 plus VAT. The fixed price follows a free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Covering Consett and nearby
Consett has a compact centre of shops, cafés and offices, with business units on its outskirts. Newcastle upon Tyne is about 19 km away.
We work across Consett's postcode districts, including DH8. We also work in nearby Stanley, Chester-le-Street and Durham. VRF and VRV air conditioning in Consett is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.
Included as standard
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Guide prices in Consett
Guide prices for Consett, set for the North East. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,295–£4,195 | £2,754–£5,034 | per unit |
| Heat recovery VRF, per indoor unit | £2,750–£4,650 | £3,300–£5,580 | per unit |
| Central controller and BMS interface | £890–£3,695 | £1,068–£4,434 | per system |
| Refrigerant leak detection (per alarmed room) | £370–£840 | £444–£1,008 | per room |
| Crane lift for roof plant | £890–£2,750 | £1,068–£3,300 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How we work in Consett
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Consett we agree timings around your opening hours.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Points to plan for in Consett
Plant space
Outdoor units need clear air flow, structural support and safe access for servicing.
Access and parking
Town-centre jobs in Consett often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Shared buildings
In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.
Who we work with in Consett
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
FAQs for Consett
How much does a VRF system cost in Consett?
Guide prices in Consett run from about £2,295 to £4,650 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £22,995–£74,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Stanley, Chester-le-Street and Durham?
Yes. Alongside Consett, we also cover Stanley, Chester-le-Street and Durham. Each has its own page with local guide prices.
Which postcodes do you cover in Consett?
All of them, including DH8. Give us your postcode when you enquire and we will confirm the visit details.
What is heat recovery VRF?
A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.
When is VRF better than separate split systems?
Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.
Talk to us about your premises in Consett
Free survey and fixed written quote. We reply with a guide price or to book the survey.