VRF and VRV systems in Corby
VRF and VRV air conditioning in Corby, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Corby?
In Corby, guide prices run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £23,995–£77,995 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Where we work around Corby
In Corby, typical commercial premises include town-centre shops and offices, surgeries, gyms and units on business parks. Northampton is about 30 km away.
Postcode districts we cover in Corby include NN17. We also cover Kettering, Market Harborough and Oakham, all within easy reach of Corby. Buildings across Northamptonshire range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.
What the job covers
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Prices in Corby
Guide prices for Corby, set for the East Midlands. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,395–£4,350 | £2,874–£5,220 | per unit |
| Heat recovery VRF, per indoor unit | £2,895–£4,850 | £3,474–£5,820 | per unit |
| Central controller and BMS interface | £925–£3,850 | £1,110–£4,620 | per system |
| Refrigerant leak detection (per alarmed room) | £385–£875 | £462–£1,050 | per room |
| Crane lift for roof plant | £925–£2,895 | £1,110–£3,474 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
The steps for a project in Corby
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Corby we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Things to check in Corby
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Leased premises
If your Corby premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Roof and height work
Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.
Typical premises in Corby
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Common questions from businesses in Corby
How much does a VRF system cost in Corby?
Guide prices in Corby run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,995–£77,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover Kettering, Market Harborough and Oakham?
Yes. Alongside Corby, we also cover Kettering, Market Harborough and Oakham. Each has its own page with local guide prices.
Which postcodes do you cover in Corby?
All of them, including NN17. Give us your postcode when you enquire and we will confirm the visit details.
How long does a VRF system last?
With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
Talk to us about your premises in Corby
Free survey and fixed written quote. We reply with a guide price or to book the survey.