0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Hamilton

A free survey, a clear specification and a fixed price for VRF and VRV air conditioning in Hamilton.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Hamilton?

Budget roughly £2,350–£4,750 per indoor unit (whole system) ex VAT in Hamilton. For a typical job — office floor of 10–16 indoor units — expect £23,500–£76,500 plus VAT. Your exact price is fixed in writing once we have surveyed.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Our coverage in Hamilton

Businesses in Hamilton range from independent shops and restaurants to offices, clinics and warehouses. Glasgow is about 17 km away.

We work across Hamilton's postcode districts, including ML3. We also work in nearby Motherwell, Blantyre and Larkhall. Buildings across Lanarkshire range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

Included as standard

  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration
  • Phased installation, pressure testing, commissioning and full F-gas records

VRF / VRV prices in Hamilton

Guide prices for Hamilton, set for Scotland. Your fixed price comes in writing.

VRF / VRV guide prices, Hamilton
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,350–£4,250£2,820–£5,100per unit
Heat recovery VRF, per indoor unit£2,850–£4,750£3,420–£5,700per unit
Central controller and BMS interface£905–£3,795£1,086–£4,554per system
Refrigerant leak detection (per alarmed room)£380–£860£456–£1,032per room
Crane lift for roof plant£905–£2,850£1,086–£3,420per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

How it works in Hamilton

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Hamilton screened and tidy at the end of each day.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

What to think about in Hamilton

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Conservation areas

Historic streets and listed buildings in and around Hamilton are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Refrigerant in occupied rooms

Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Typical premises in Hamilton

  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.

In Scotland, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; systems with an effective output of 12 kW or more also need a periodic energy inspection.

Common questions from businesses in Hamilton

How much does a VRF system cost in Hamilton?

Guide prices in Hamilton run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,500–£76,500 plus VAT. We fix the price in writing after a free survey.

Do you also cover Motherwell, Blantyre and Larkhall?

Yes. Alongside Hamilton, we also cover Motherwell, Blantyre and Larkhall. Each has its own page with local guide prices.

Which postcodes do you cover in Hamilton?

All of them, including ML3. Give us your postcode when you enquire and we will confirm the visit details.

How long does a VRF system last?

With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.

Does a VRF system need F-gas leak checks?

Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.

Get a guide price for Hamilton

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote