0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Hawarden

VRF and VRV air conditioning for businesses in Hawarden — surveyed, designed and priced in writing before any work starts.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Hawarden?

Budget roughly £2,350–£4,695 per indoor unit (whole system) ex VAT in Hawarden. For a typical job — office floor of 10–16 indoor units — expect £23,500–£75,500 plus VAT. You get a fixed written quote after the free survey.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Hawarden and surrounding areas

In Hawarden, typical premises are high-street shops, offices above them, surgeries, salons and local industrial units.

Postcode districts we cover in Hawarden include CH5. Neighbouring towns we cover include Deeside, Buckley and Flint. Buildings across Clwyd range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

What you get

  • Heat load and diversity calculations for every zone
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration
  • Phased installation, pressure testing, commissioning and full F-gas records

VRF / VRV prices in Hawarden

These guide prices are adjusted for Wales, where labour and access costs run about 5% below the UK guide.

VRF / VRV guide prices, Hawarden
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,350–£4,250£2,820–£5,100per unit
Heat recovery VRF, per indoor unit£2,795–£4,695£3,354–£5,634per unit
Central controller and BMS interface£895–£3,750£1,074–£4,500per system
Refrigerant leak detection (per alarmed room)£375–£845£450–£1,014per room
Crane lift for roof plant£895–£2,795£1,074–£3,354per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

From enquiry to handover in Hawarden

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Hawarden screened and tidy at the end of each day.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Things to check in Hawarden

Leak checks

Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.

Shared buildings

In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Premises we work in around Hawarden

  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.

Compliance in Wales: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Your questions answered

How much does a VRF system cost in Hawarden?

Guide prices in Hawarden run from about £2,350 to £4,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,500–£75,500 plus VAT. We fix the price in writing after a free survey.

Do you also cover Deeside, Buckley and Flint?

Yes. Alongside Hawarden, we also cover Deeside, Buckley and Flint. Each has its own page with local guide prices.

Which postcodes do you cover in Hawarden?

All of them, including CH5. Give us your postcode when you enquire and we will confirm the visit details.

Can VRF connect to our BMS?

Yes, through the manufacturer's interface. We specify the right gateway at design stage.

What is the difference between VRF and VRV?

None in practice. VRV is one manufacturer's trademark; VRF is the generic name for the same type of system.

Get a guide price for Hawarden

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote