VRF and VRV systems in Lancashire
VRF and VRV air conditioning for businesses in Lancashire — surveyed, designed and priced in writing before any work starts.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Lancashire?
In Lancashire, guide prices run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £23,995–£77,995 plus VAT. You get a fixed written quote after the free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Our coverage in Lancashire
We cover all of Lancashire, including Preston, Burnley, Blackburn, Blackpool and Morecambe. Wherever your premises are, the survey, quote and installation follow the same steps.
Postcode districts we cover include BB1, BB8, BD23, FY3, L40, OL12, PR5 and WN8. In Lancashire, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.
What we do
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
Guide prices in Lancashire
Guide prices for Lancashire, set for the North West. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,395–£4,350 | £2,874–£5,220 | per unit |
| Heat recovery VRF, per indoor unit | £2,895–£4,850 | £3,474–£5,820 | per unit |
| Central controller and BMS interface | £925–£3,850 | £1,110–£4,620 | per system |
| Refrigerant leak detection (per alarmed room) | £385–£875 | £462–£1,050 | per room |
| Crane lift for roof plant | £925–£2,895 | £1,110–£3,474 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How a job in Lancashire works
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Lancashire screened and tidy at the end of each day.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
What to think about in Lancashire
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Working hours
Most Lancashire businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Access and parking
Town-centre jobs in Lancashire often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Who we work with in Lancashire
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
Common questions from businesses in Lancashire
How much does a VRF system cost in Lancashire?
Guide prices in Lancashire run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,995–£77,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover Greater Manchester, Merseyside and Cheshire?
Yes. Alongside Lancashire, we also cover Greater Manchester, Merseyside and Cheshire. Each has its own page with local guide prices.
When is VRF better than separate split systems?
Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
Talk to us about your premises in Lancashire
Free survey and fixed written quote. We reply with a guide price or to book the survey.