0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Lincolnshire

VRF and VRV air conditioning in Lincolnshire, sized to the real heat load of your premises rather than guessed from the floor area.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Lincolnshire?

Our guide range in Lincolnshire is £2,395–£4,850 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £23,995–£77,995 plus VAT. Your exact price is fixed in writing once we have surveyed.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Covering Lincolnshire and nearby

We cover all of Lincolnshire, including Lincoln, Grimsby, Scunthorpe, Boston and Grantham. Each town below has its own page with local guide prices.

Postcode districts we cover include DN8, DN20, DN36, LN2, LN9, NG32, PE12 and PE25. VRF and VRV air conditioning in Lincolnshire is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.

What we do

  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration
  • Phased installation, pressure testing, commissioning and full F-gas records

VRF / VRV prices in Lincolnshire

These guide prices are adjusted for the East Midlands, where labour and access costs run about 2% below the UK guide.

VRF / VRV guide prices, Lincolnshire
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,395–£4,350£2,874–£5,220per unit
Heat recovery VRF, per indoor unit£2,895–£4,850£3,474–£5,820per unit
Central controller and BMS interface£925–£3,850£1,110–£4,620per system
Refrigerant leak detection (per alarmed room)£385–£875£462–£1,050per room
Crane lift for roof plant£925–£2,895£1,110–£3,474per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

How a job in Lincolnshire works

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Lincolnshire we agree timings around your opening hours.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Local points to consider

Refrigerant in occupied rooms

Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.

Access and parking

Town-centre jobs in Lincolnshire often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.

Leak checks

Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Who we work with in Lincolnshire

  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.

Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.

Questions about VRF / VRV in Lincolnshire

How much does a VRF system cost in Lincolnshire?

Guide prices in Lincolnshire run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,995–£77,995 plus VAT. We fix the price in writing after a free survey.

Do you also cover Nottinghamshire, Rutland and the East Riding of Yorkshire?

Yes. Alongside Lincolnshire, we also cover Nottinghamshire, Rutland and the East Riding of Yorkshire. Each has its own page with local guide prices.

Can VRF connect to our BMS?

Yes, through the manufacturer's interface. We specify the right gateway at design stage.

Does a VRF system need F-gas leak checks?

Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.

Need VRF and VRV air conditioning in Lincolnshire?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote