VRF and VRV systems in Salford
Cooling and heating for offices, shops and hospitality venues in Salford, with a free site survey and a fixed written quote.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Salford?
Our guide range in Salford is £2,395–£4,850 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £23,995–£77,995 plus VAT. Your exact price is fixed in writing once we have surveyed.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Salford and surrounding areas
In Salford, typical commercial premises include town-centre shops and offices, surgeries, gyms and units on business parks. Manchester is about 4 km away.
Postcode districts we cover in Salford include M5, M6, M50, MK17 and OX7. Nearby, we also cover Eccles (about 3 km), Manchester (about 4 km) and Prestwich (about 5 km). In Salford, outdoor unit positions are often the deciding factor: a rear flat roof or yard is usually straightforward, while a front elevation may need landlord or planning consent first.
What is included
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Prices in Salford
Guide prices for Salford, set for the North West. Your fixed price comes in writing.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,395–£4,350 | £2,874–£5,220 | per unit |
| Heat recovery VRF, per indoor unit | £2,895–£4,850 | £3,474–£5,820 | per unit |
| Central controller and BMS interface | £925–£3,850 | £1,110–£4,620 | per system |
| Refrigerant leak detection (per alarmed room) | £385–£875 | £462–£1,050 | per room |
| Crane lift for roof plant | £925–£2,895 | £1,110–£3,474 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How a job in Salford works
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Salford we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Points to plan for in Salford
Plant space
Outdoor units need clear air flow, structural support and safe access for servicing.
Roof and height work
Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Who we work with in Salford
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Your questions answered
How much does a VRF system cost in Salford?
Guide prices in Salford run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,995–£77,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover Eccles, Manchester and Prestwich?
Yes. Alongside Salford, we also cover Eccles, Manchester and Prestwich. Each has its own page with local guide prices.
Which postcodes do you cover in Salford?
All of them, including M5, M6, M50 and MK17. Give us your postcode when you enquire and we will confirm the visit details.
When is VRF better than separate split systems?
Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.
Does a VRF system need F-gas leak checks?
Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.
Talk to us about your premises in Salford
Free survey and fixed written quote. We reply with a guide price or to book the survey.