VRF and VRV systems in Tyldesley
VRF and VRV air conditioning for businesses in Tyldesley — surveyed, designed and priced in writing before any work starts.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Tyldesley?
In Tyldesley, guide prices run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £23,995–£77,995 plus VAT. You get a fixed written quote after the free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Tyldesley and surrounding areas
Tyldesley has a compact centre of shops, cafés and offices, with business units on its outskirts. Bolton is about 8 km away.
We work across Tyldesley's postcode districts, including M29. Neighbouring towns we cover include Atherton, Leigh and Westhoughton. VRF and VRV air conditioning in Tyldesley is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.
What the job covers
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Local guide prices for Tyldesley
Prices below include our regional adjustment for the North West (2% below the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,395–£4,350 | £2,874–£5,220 | per unit |
| Heat recovery VRF, per indoor unit | £2,895–£4,850 | £3,474–£5,820 | per unit |
| Central controller and BMS interface | £925–£3,850 | £1,110–£4,620 | per system |
| Refrigerant leak detection (per alarmed room) | £385–£875 | £462–£1,050 | per room |
| Crane lift for roof plant | £925–£2,895 | £1,110–£3,474 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How a job in Tyldesley works
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Tyldesley we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Local points to consider
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Conservation areas
Historic streets and listed buildings in and around Tyldesley are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Neighbours and noise
Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.
Typical premises in Tyldesley
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Questions about VRF / VRV in Tyldesley
How much does a VRF system cost in Tyldesley?
Guide prices in Tyldesley run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,995–£77,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover Atherton, Leigh and Westhoughton?
Yes. Alongside Tyldesley, we also cover Atherton, Leigh and Westhoughton. Each has its own page with local guide prices.
Which postcodes do you cover in Tyldesley?
All of them, including M29. Give us your postcode when you enquire and we will confirm the visit details.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
When is VRF better than separate split systems?
Usually once you need more than about six to eight indoor units, want central control, or are short of space for outdoor units. One outdoor unit can replace many.
Get a guide price for Tyldesley
Free survey and fixed written quote. We reply with a guide price or to book the survey.