0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Wellington

From a single room to a whole floor: VRF and VRV air conditioning in Wellington, planned around your trading hours.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Wellington?

In Wellington, guide prices run from about £2,450 to £4,950 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £24,500–£79,500 plus VAT. You get a fixed written quote after the free survey.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Working in Wellington

Most commercial premises in and around Wellington are shops, offices, salons, pubs and small industrial units. Telford is about 5 km away.

We work across Wellington's postcode districts, including CA20, HR4, TA21 and TF1. Nearby, we also cover Telford (about 5 km), Shrewsbury (about 16 km) and Stafford (about 29 km). VRF and VRV air conditioning in Wellington is priced from a written specification: unit sizes, positions, pipe routes, condensate, electrics, controls and commissioning are all listed.

What is included

  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration
  • Phased installation, pressure testing, commissioning and full F-gas records

VRF / VRV prices in Wellington

These guide prices are adjusted for the West Midlands, where labour and access costs run at about the UK guide level.

VRF / VRV guide prices, Wellington
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,450–£4,450£2,940–£5,340per unit
Heat recovery VRF, per indoor unit£2,950–£4,950£3,540–£5,940per unit
Central controller and BMS interface£945–£3,950£1,134–£4,740per system
Refrigerant leak detection (per alarmed room)£395–£895£474–£1,074per room
Crane lift for roof plant£945–£2,950£1,134–£3,540per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

From enquiry to handover in Wellington

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Wellington we confirm access and parking beforehand.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

What to think about in Wellington

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Leased premises

If your Wellington premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.

Plant space

Outdoor units need clear air flow, structural support and safe access for servicing.

Working hours

Most Wellington businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Premises we work in around Wellington

  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.

In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.

Your questions answered

How much does a VRF system cost in Wellington?

Guide prices in Wellington run from about £2,450 to £4,950 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £24,500–£79,500 plus VAT. We fix the price in writing after a free survey.

Do you also cover Telford, Shrewsbury and Stafford?

Yes. Alongside Wellington, we also cover Telford, Shrewsbury and Stafford. Each has its own page with local guide prices.

Which postcodes do you cover in Wellington?

All of them, including CA20, HR4, TA21 and TF1. Give us your postcode when you enquire and we will confirm the visit details.

What is heat recovery VRF?

A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.

Does a VRF system need F-gas leak checks?

Usually yes. Most VRF systems hold enough refrigerant to exceed 5 tonnes CO2 equivalent, which triggers at least annual leak checks and record keeping.

Need VRF and VRV air conditioning in Wellington?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote