0800 088 6248
Old rusty condenser on a pallet beside a new outdoor unit being connected on a flat roof

Air conditioning replacement and upgrades in Brixton

Air conditioning replacement in Brixton, sized to the real heat load of your premises rather than guessed from the floor area.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does it cost to replace air conditioning in Brixton?

Budget roughly £2,095–£5,695 per indoor unit ex VAT in Brixton. For a typical job — replacing a 3–4 unit system, re-using sound pipework — expect £7,595–£18,550 plus VAT. The fixed price follows a free survey.

Air conditioning replacement is removing an old system — often one using R22 or R410A refrigerant — and installing new, more efficient equipment, re-using pipework where it is safe and compatible.

Where we work around Brixton

In Brixton, commercial premises range from street-level shops and restaurants to offices in converted and modern buildings, many with managing agents and landlord consents to work through.

That includes premises in PL8 and SW2 and the surrounding districts. Nearby, we also cover Peckham (about 3 km), Pimlico (about 3 km) and Battersea (about 4 km). Buildings across London range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

What is included

  • Condition survey of the existing system
  • Pipework re-use assessment, flushing where suitable
  • Refrigerant recovery with waste transfer documentation
  • Removal and disposal of old equipment
  • Installation of new efficient units

Local guide prices for Brixton

Guide prices for Brixton, set for London. Your fixed price comes in writing.

Replacement and upgrades guide prices, Brixton
ItemGuide price (ex VAT)Inc VATBasis
Like-for-like split replacement£2,095–£4,395£2,514–£5,274per system
Cassette replacement£2,750–£5,695£3,300–£6,834per unit
Refrigerant recovery and disposal£245–£760£294–£912per system
Pipework flush and test (re-use)£245–£760£294–£912per circuit

Ex VAT, supply and install.

How it works in Brixton

  1. Survey

    We record what is installed, its condition and refrigerant, and what can be re-used. For sites in Brixton we confirm access and parking beforehand.

  2. Plan the swap

    Removal and installation are scheduled to keep downtime short.

  3. Recover and remove

    Refrigerant is recovered into certified cylinders and the old units removed.

  4. Install and commission

    New units are fitted, tested and commissioned with fresh records.

Points to plan for in Brixton

Pipe re-use

Re-use depends on pipe size, condition, cleanliness and the new refrigerant. We test before relying on it.

Neighbours and noise

Outdoor units near flats — common above shops — need careful siting so noise at neighbours' windows stays low. We choose positions and quieter units with that in mind.

Disposal

Old refrigerant must be recovered by certified engineers and the units disposed of as waste electrical equipment.

Conservation areas

Historic streets and listed buildings in and around Brixton are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Premises we work in around Brixton

  • Gyms and leisure: high-capacity cooling and fresh air for gym floors, studios and changing rooms.
  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Salons and spas: comfortable salons and treatment rooms despite dryers, lamps and steam.
  • Retail and shops: comfortable shop floors, stockrooms and entrances, even with the door open.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

Questions about replacement and upgrades in Brixton

How much does it cost to replace air conditioning in Brixton?

Guide prices in Brixton run from about £2,095 to £5,695 per indoor unit, plus VAT. A typical job (replacing a 3–4 unit system, re-using sound pipework) costs £7,595–£18,550 plus VAT. We fix the price in writing after a free survey.

Do you also cover Peckham, Pimlico and Battersea?

Yes. Alongside Brixton, we also cover Peckham, Pimlico and Battersea. Each has its own page with local guide prices.

Which postcodes do you cover in Brixton?

All of them, including PL8 and SW2. Give us your postcode when you enquire and we will confirm the visit details.

Should we replace R410A systems now?

Not necessarily. If an R410A system is working well and maintained, keep it. Plan replacement when it becomes unreliable or expensive to run.

Will a new system be cheaper to run?

Usually. Modern inverter systems are considerably more efficient than equipment from 15–20 years ago, though savings depend on use.

Talk to us about your premises in Brixton

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote