VRF and VRV systems in Banbury
VRF and VRV air conditioning in Banbury, sized to the real heat load of your premises rather than guessed from the floor area.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Banbury?
Our guide range in Banbury is £2,795–£5,695 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £27,995–£91,500 plus VAT. You get a fixed written quote after the free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Banbury and surrounding areas
Businesses in Banbury range from independent shops and restaurants to offices, clinics and warehouses. Oxford is about 35 km away.
Postcode districts we cover in Banbury include OX16. We also work in nearby Bicester, Daventry and Leamington Spa. For VRF and VRV air conditioning in Banbury, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.
Included as standard
- Heat load and diversity calculations for every zone
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Prices in Banbury
These guide prices are adjusted for the South East, where labour and access costs run about 15% above the UK guide.
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,795–£5,095 | £3,354–£6,114 | per unit |
| Heat recovery VRF, per indoor unit | £3,395–£5,695 | £4,074–£6,834 | per unit |
| Central controller and BMS interface | £1,095–£4,550 | £1,314–£5,460 | per system |
| Refrigerant leak detection (per alarmed room) | £455–£1,050 | £546–£1,260 | per room |
| Crane lift for roof plant | £1,095–£3,395 | £1,314–£4,074 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How a job in Banbury works
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Banbury we agree timings around your opening hours.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Local points to consider
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Access and parking
Town-centre jobs in Banbury often come down to access — loading restrictions, parking for the van and getting equipment onto a roof. We check this at survey and plan deliveries around it.
Phasing
In occupied buildings we plan the work floor by floor so the business keeps running.
Working hours
Most Banbury businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.
Who we work with in Banbury
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).
Your questions answered
How much does a VRF system cost in Banbury?
Guide prices in Banbury run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £27,995–£91,500 plus VAT. We fix the price in writing after a free survey.
Do you also cover Bicester, Daventry and Leamington Spa?
Yes. Alongside Banbury, we also cover Bicester, Daventry and Leamington Spa. Each has its own page with local guide prices.
Which postcodes do you cover in Banbury?
All of them, including OX16. Give us your postcode when you enquire and we will confirm the visit details.
What is heat recovery VRF?
A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
Need VRF and VRV air conditioning in Banbury?
Free survey and fixed written quote. We reply with a guide price or to book the survey.