0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Bathgate

From a single room to a whole floor: VRF and VRV air conditioning in Bathgate, planned around your trading hours.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Bathgate?

In Bathgate, guide prices run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £23,500–£76,500 plus VAT. Your exact price is fixed in writing once we have surveyed.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Covering Bathgate and nearby

Bathgate is a smaller town in the Lothians, with independent shops, offices, surgeries, pubs and local business units. Edinburgh is about 29 km away.

We work across Bathgate's postcode districts, including EH48. We also cover Livingston, Broxburn and Grangemouth, all within easy reach of Bathgate. For VRF and VRV air conditioning in Bathgate, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.

What we do

  • Heat load and diversity calculations for every zone
  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Central controls, scheduling and BMS integration

Prices in Bathgate

These guide prices are adjusted for Scotland, where labour and access costs run about 4% below the UK guide.

VRF / VRV guide prices, Bathgate
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,350–£4,250£2,820–£5,100per unit
Heat recovery VRF, per indoor unit£2,850–£4,750£3,420–£5,700per unit
Central controller and BMS interface£905–£3,795£1,086–£4,554per system
Refrigerant leak detection (per alarmed room)£380–£860£456–£1,032per room
Crane lift for roof plant£905–£2,850£1,086–£3,420per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

The steps for a project in Bathgate

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Bathgate we agree timings around your opening hours.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Points to plan for in Bathgate

Refrigerant in occupied rooms

Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.

Shared buildings

In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Working hours

Most Bathgate businesses prefer noisy work outside trading hours. Early starts, evenings and weekends can be arranged and are priced up front.

Who we work with in Bathgate

  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.

Compliance in Scotland: refrigerant work falls under GB F-gas rules, and systems with an effective output of 12 kW or more need a periodic energy inspection (often called TM44).

Common questions from businesses in Bathgate

How much does a VRF system cost in Bathgate?

Guide prices in Bathgate run from about £2,350 to £4,750 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,500–£76,500 plus VAT. We fix the price in writing after a free survey.

Do you also cover Livingston, Broxburn and Grangemouth?

Yes. Alongside Bathgate, we also cover Livingston, Broxburn and Grangemouth. Each has its own page with local guide prices.

Which postcodes do you cover in Bathgate?

All of them, including EH48. Give us your postcode when you enquire and we will confirm the visit details.

Can VRF connect to our BMS?

Yes, through the manufacturer's interface. We specify the right gateway at design stage.

What is heat recovery VRF?

A version that can cool some zones and heat others at the same time, moving heat around the building instead of dumping it outside.

Talk to us about your premises in Bathgate

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote