VRF and VRV systems in Bolton
A free survey, a clear specification and a fixed price for VRF and VRV air conditioning in Bolton.
- Free site survey and fixed written quote
- Unit sizes, refrigerant and price set out in writing
- Work planned around your opening hours
How much does a VRF system cost in Bolton?
In Bolton, guide prices run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £23,995–£77,995 plus VAT. You get a fixed written quote after the free survey.
VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.
Bolton and surrounding areas
Bolton supports a mix of high-street retail, professional offices, hospitality and light industry. Wigan is about 14 km away.
That includes premises in BL1, BL11, BL78, CA16 and NE66 and the surrounding districts. We also cover Farnworth, Westhoughton and Radcliffe, all within easy reach of Bolton. For VRF and VRV air conditioning in Bolton, the survey looks at where the outdoor unit can go, how pipework will reach the indoor units and whether the electrical supply has capacity.
What you get
- Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
- Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
- Leak detection where the refrigerant concentration limits require it
- Central controls, scheduling and BMS integration
- Phased installation, pressure testing, commissioning and full F-gas records
Local guide prices for Bolton
Prices below include our regional adjustment for the North West (2% below the UK guide).
| Item | Guide price (ex VAT) | Inc VAT | Basis |
|---|---|---|---|
| Heat pump VRF, per indoor unit | £2,395–£4,350 | £2,874–£5,220 | per unit |
| Heat recovery VRF, per indoor unit | £2,895–£4,850 | £3,474–£5,820 | per unit |
| Central controller and BMS interface | £925–£3,850 | £1,110–£4,620 | per system |
| Refrigerant leak detection (per alarmed room) | £385–£875 | £462–£1,050 | per room |
| Crane lift for roof plant | £925–£2,895 | £1,110–£3,474 | per lift |
Ex VAT, installed system prices including outdoor plant shared across indoor units.
How a job in Bolton works
Survey and loads
We calculate loads zone by zone and check roof or plant space, risers and ceiling voids. For sites in Bolton we confirm access and parking beforehand.
System design
Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.
Phased first fix
Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings.
Pressure test and charge
The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.
Commissioning
Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.
Points to plan for in Bolton
Leak checks
Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.
Roof and height work
Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.
Refrigerant in occupied rooms
Because one network carries a large refrigerant charge, small rooms on the system are checked against the safety limits in BS EN 378 and may need leak detection.
Leased premises
If your Bolton premises are leased, the landlord's written consent is usually needed for external units, wall penetrations and roof access. We provide drawings and data sheets for the request.
Who we work with in Bolton
- Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
- Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
In England, systems holding 5 tonnes CO2 equivalent of refrigerant or more fall under GB F-gas rules, with regular leak checks and records; buildings with more than 12 kW of air conditioning in total also need a periodic energy inspection.
Questions about VRF / VRV in Bolton
How much does a VRF system cost in Bolton?
Guide prices in Bolton run from about £2,395 to £4,850 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £23,995–£77,995 plus VAT. We fix the price in writing after a free survey.
Do you also cover Farnworth, Westhoughton and Radcliffe?
Yes. Alongside Bolton, we also cover Farnworth, Westhoughton and Radcliffe. Each has its own page with local guide prices.
Which postcodes do you cover in Bolton?
All of them, including BL1, BL11, BL78 and CA16. Give us your postcode when you enquire and we will confirm the visit details.
How long does a VRF system last?
With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.
Can VRF connect to our BMS?
Yes, through the manufacturer's interface. We specify the right gateway at design stage.
Get a guide price for Bolton
Free survey and fixed written quote. We reply with a guide price or to book the survey.