0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Brighton

VRF and VRV air conditioning in Brighton, sized to the real heat load of your premises rather than guessed from the floor area.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Brighton?

In Brighton, guide prices run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) usually comes to £27,995–£91,500 plus VAT. The fixed price follows a free survey.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Our coverage in Brighton

Brighton is one of the main commercial centres in East Sussex, with city-centre offices, retail streets, hospitality venues and business parks on its edges.

We cover every Brighton postcode, including BN2 and TR2. We also cover Hove, Portslade and Shoreham-by-Sea, all within easy reach of Brighton. In Brighton we work with offices, shops and hospitality premises, from a single room to a whole floor; each job starts with a heat load check rather than a guess from the floor area.

What we do

  • Heat load and diversity calculations for every zone
  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Central controls, scheduling and BMS integration
  • Phased installation, pressure testing, commissioning and full F-gas records

Guide prices in Brighton

Prices below include our regional adjustment for the South East (15% above the UK guide).

VRF / VRV guide prices, Brighton
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,795–£5,095£3,354–£6,114per unit
Heat recovery VRF, per indoor unit£3,395–£5,695£4,074–£6,834per unit
Central controller and BMS interface£1,095–£4,550£1,314–£5,460per system
Refrigerant leak detection (per alarmed room)£455–£1,050£546–£1,260per room
Crane lift for roof plant£1,095–£3,395£1,314–£4,074per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

The steps for a project in Brighton

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. We keep work areas in Brighton screened and tidy at the end of each day.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Things to check in Brighton

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Leak checks

Larger VRF systems usually exceed 5 tonnes CO2 equivalent, so they need at least annual F-gas leak checks — more often at 50 tonnes and above.

Conservation areas

Historic streets and listed buildings in and around Brighton are more likely to need planning permission for outdoor units on visible elevations. We check with the local planning authority before work is booked.

Types of premises we cover in Brighton

  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.
  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.

Two rules matter for most businesses in England: GB F-gas rules (leak checks from 5 tonnes CO2e) and the periodic energy inspection for more than 12 kW of air conditioning.

FAQs for Brighton

How much does a VRF system cost in Brighton?

Guide prices in Brighton run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £27,995–£91,500 plus VAT. We fix the price in writing after a free survey.

Do you also cover Hove, Portslade and Shoreham-by-Sea?

Yes. Alongside Brighton, we also cover Hove, Portslade and Shoreham-by-Sea. Each has its own page with local guide prices.

Which postcodes do you cover in Brighton?

All of them, including BN2 and TR2. Give us your postcode when you enquire and we will confirm the visit details.

Can VRF connect to our BMS?

Yes, through the manufacturer's interface. We specify the right gateway at design stage.

How long does a VRF system last?

With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.

Need VRF and VRV air conditioning in Brighton?

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote