0800 088 6248
Bank of VRF outdoor units on a steel platform with insulated refrigerant pipework

VRF and VRV systems in Portslade

A free survey, a clear specification and a fixed price for VRF and VRV air conditioning in Portslade.

  • Free site survey and fixed written quote
  • Unit sizes, refrigerant and price set out in writing
  • Work planned around your opening hours

How much does a VRF system cost in Portslade?

Our guide range in Portslade is £2,795–£5,695 per indoor unit (whole system) before VAT; a typical job (office floor of 10–16 indoor units) is £27,995–£91,500 plus VAT. You get a fixed written quote after the free survey.

VRF (variable refrigerant flow) — called VRV by some manufacturers — is a commercial air conditioning system where one outdoor unit, or a bank of them, serves many indoor units through a shared refrigerant network.

Portslade and surrounding areas

Portslade is a smaller town in East Sussex, with independent shops, offices, surgeries, pubs and local business units. Brighton is about 6 km away.

We cover every Portslade postcode, including BN41. Nearby, we also cover Hove (about 4 km), Shoreham-by-Sea (about 4 km) and Brighton (about 6 km). Buildings across East Sussex range from converted period offices to modern units with deep ceiling voids, so we measure each site rather than relying on a standard package.

What you get

  • Heat load and diversity calculations for every zone
  • Two-pipe (heat pump) or three-pipe / two-pipe heat recovery system design
  • Refrigerant pipework sizing, branch selectors and refrigerant charge calculation
  • Leak detection where the refrigerant concentration limits require it
  • Phased installation, pressure testing, commissioning and full F-gas records

Guide prices in Portslade

Guide prices for Portslade, set for the South East. Your fixed price comes in writing.

VRF / VRV guide prices, Portslade
ItemGuide price (ex VAT)Inc VATBasis
Heat pump VRF, per indoor unit£2,795–£5,095£3,354–£6,114per unit
Heat recovery VRF, per indoor unit£3,395–£5,695£4,074–£6,834per unit
Central controller and BMS interface£1,095–£4,550£1,314–£5,460per system
Refrigerant leak detection (per alarmed room)£455–£1,050£546–£1,260per room
Crane lift for roof plant£1,095–£3,395£1,314–£4,074per lift

Ex VAT, installed system prices including outdoor plant shared across indoor units.

How we work in Portslade

  1. Survey and loads

    We calculate loads zone by zone and check roof or plant space, risers and ceiling voids.

  2. System design

    Outdoor units, indoor units, branch boxes and pipe sizes are designed together, including the refrigerant charge and any leak detection.

  3. Phased first fix

    Pipework and controls cabling go in floor by floor, often out of hours in occupied buildings. In Portslade we agree timings around your opening hours.

  4. Pressure test and charge

    The network is pressure tested, evacuated and charged with the calculated refrigerant quantity.

  5. Commissioning

    Each indoor unit is commissioned and the controls set up, with as-fitted drawings and F-gas records handed over.

Points to plan for in Portslade

Phasing

In occupied buildings we plan the work floor by floor so the business keeps running.

Shared buildings

In multi-let buildings, roof space, risers and plant areas are often controlled by a managing agent. We work to their permits and method-statement requirements.

Plant space

Outdoor units need clear air flow, structural support and safe access for servicing.

Roof and height work

Flat roofs, high walls and atriums need the right access equipment and edge protection. We plan towers, MEWPs or scaffold before the job, not on the day.

Premises we work in around Portslade

  • Hotels and hospitality: quiet bedroom units, public-area cooling and heat recovery for hotels.
  • Offices: zoned cooling and heating for open-plan floors, meeting rooms and comms rooms.

Compliance in England: refrigerant work falls under GB F-gas rules, and buildings with more than 12 kW of air conditioning in total need a periodic energy inspection (often called TM44).

FAQs for Portslade

How much does a VRF system cost in Portslade?

Guide prices in Portslade run from about £2,795 to £5,695 per indoor unit (whole system), plus VAT. A typical job (office floor of 10–16 indoor units) costs £27,995–£91,500 plus VAT. We fix the price in writing after a free survey.

Do you also cover Hove, Shoreham-by-Sea and Brighton?

Yes. Alongside Portslade, we also cover Hove, Shoreham-by-Sea and Brighton. Each has its own page with local guide prices.

Which postcodes do you cover in Portslade?

All of them, including BN41. Give us your postcode when you enquire and we will confirm the visit details.

Can VRF connect to our BMS?

Yes, through the manufacturer's interface. We specify the right gateway at design stage.

How long does a VRF system last?

With regular servicing, commercial VRF equipment commonly runs for 15 years or more. Lifespan depends on use, maintenance and the operating environment.

Talk to us about your premises in Portslade

Free survey and fixed written quote. We reply with a guide price or to book the survey.

CallGet a quote